HP Deskjet F2200 Full User Guide - Page 138
Product messages, The following is a list of product-related error messages
View all HP Deskjet F2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Troubleshooting (continued) On light Paper light On Blinking On Blinking Blinking Blinking Blinking Blinking Check Print Cartridge light Paper Type lights Descriptio Solution n HP All-inOne. The print cartridge might be defective. 1. Remove the black print cartridge. 2. Close the print cartridge door. 3. Check the On light. • If the On light blinks, replace the tri-color print cartridge. • If the On light remains steadily lit, replace the black print cartridge. Blinking 1 On, 1 Off The print carriage is stalled. Open the print cartridge door, and check that the carriage is not blocked. Blinking Both blinking The control panel overlay is not attached or is not attached properly. 1. Turn the HP All-in-One off. 2. Attach the control panel overlay using the instructions in the Setup Guide. 3. Turn the HP All-in-One back on. Blinking Both off Scanner failure Turn the HP All-in-One off, then on again. If the problem persists, contact HP customer support. Blinking Both blinking The HP Allin-One has a fatal error. 1. Turn the HP All-in-One off. 2. Unplug the power cord. 3. Wait a minute, then plug the power cord back in. 4. Turn the HP All-in-One back on. If the problem persists, contact HP Support. Product messages The following is a list of product-related error messages: • Door open • Firmware revision mismatch • Mechanism error • Memory is full Errors 135