HP LH4r HP Netserver LXr 8000 Installation Guide - Page 128
Brackets, Slide
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Chapter 13 Alternative Rack Mounting Step 2: Attaching the Slides to the Rack Before fastening the slides in the rack, you must detach the slides' mounting flanges. They are not used in the HP System Rack. Instead, studs on the slide insert in holes on the inside face (the side) of the rack columns. 1. Use a nut driver or wrench to detach the two mounting flanges from each slide. See Figure 13-3. Slide Brackets Figure 13-3. Removing the Slides' Mounting Flanges 2. Pull the stabilizing foot forward out of the bottom of the rack. 3. Hold the template alongside the inside face (the side) of the left-front rack column. Line up the template with the same rack space that the server will occupy. (The template covers an area 7 EIA units high, the same height the server requires.) The template directs you to a single hole in the rack column that will be used for mounting the slide. Mark the hole for future reference. If you do not have the template, Figure 13-4 shows what hole on the column the slide will mount through. 120