HP LH4r HP Netserver LXr 8000 Installation Guide - Page 133
Remove the screws that attach the handles to the server. See
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Chapter 13 Alternative Rack Mounting 3. With the help of at least one other person, lift the server by its four handles. Move the server between the extended slide members, so that the slides are underneath the server's handles on each side. See Figure 13-8. 1. Move server onto slides 2. Fasten server to slides with screws Figure 13-8. Mounting the Server on the Slides 4. Lower the server onto the slide members. The server's handles will support the server on the slides for now. Adjust the server's position on the slides so that the mounting holes on the side of the chassis line up with the screw holes in the slide members. 5. Fasten the server to the slides with screws. 6. Remove the screws that attach the handles to the server. (See Figure 13-9). Take the handles off the server. Store the handles and screws in a convenient place. Reattach the handles whenever you remove the server from the rack. (If you plan on shipping the server elsewhere, always pack it with the handles attached.) 125