HP LH4r HP Netserver LXr 8000 Installation Guide - Page 31
back approximately one half-inch. See
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Chapter 3 Opening and Closing the HP NetServer tools or jewelry. Disconnect any telephone cables to avoid exposure to shock hazard from telephone ringing voltages. 3. Remove the two Torx screws at the front of the cover, then slide the cover back approximately one half-inch. See Figure 3-2. 1. Remove screws 2. Pull back cover 1/2 inch Figure 3-2. Unfastening the Cover and Sliding It Back 4. Lift off the cover. See Figure 3-3. 23
Chapter 3
Opening and Closing the HP NetServer
23
tools or jewelry. Disconnect any telephone cables to avoid
exposure to shock hazard from telephone ringing voltages.
3.
Remove the two Torx screws at the front of the cover, then slide the cover
back approximately one half-inch. See Figure 3-2.
1. Remove screws
2. Pull back cover
1/2 inch
Figure 3-2. Unfastening the Cover and Sliding It Back
4.
Lift off the cover. See Figure 3-3.