HP LH4r HP Netserver LXr 8000 Installation Guide - Page 33
cover. Push the panel back about one half-inch.
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Chapter 3 Opening and Closing the HP NetServer To remove the PCI Hot Plug access panel and reach the hot-plug slots: 1. Remove the Torx screws that fasten the access panel to the rest of the top cover. Push the panel back about one half-inch. 1. Remove screws 2. Push panel back 1/2 inch Figure 3-3. Unfastening the PCI Hot Plug Access Panel 25
Chapter 3
Opening and Closing the HP NetServer
25
To remove the PCI Hot Plug access panel and reach the hot-plug slots:
1.
Remove the Torx screws that fasten the access panel to the rest of the top
cover. Push the panel back about one half-inch.
1. Remove screws
2. Push panel
back 1/2 inch
Figure 3-3. Unfastening the PCI Hot Plug Access Panel