HP LH4r HP Netserver LXr 8000 Installation Guide - Page 87
Bottom of, Server, Right
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Chapter 8 Mounting the Server in the Rack 3. Slide the rack nuts onto the column where indicated on the template. (See Figure 8-2.) If you don't have the template, Figure 8-3 shows rack nut placement for the front columns. Figure 8-2. Placing Rack Nuts on Rack Columns Seventeenth Hole From Bottom # "#" represents the EIA unit numbers on the rack columns Ninth Hole From Bottom Sixth Hole From Bottom Fourth Hole From Bottom # Front of Rack # Left Right # Bottom of # Server Attach nuts to this face of the left-front and right-front columns Figure 8-3. Rack Nut Locations on the Rack's Front Columns 4. Attach rack nuts to the outside face of the other front rack column. (See steps 2 and 3.) 5. Turn the template over and use it to mount rack nuts on the left-rear and right-rear rack columns. Again, the template shows you where to place the nuts. If you don't have the template, Figure 8-4 shows rack nut placement for the two rear rack columns. 79