HP LaserJet P4510 HP LaserJet P4010 and P4510 Series - Software Technical Refe - Page 178

When you have completed the steps in the dialog box, the second half of the print job prints on the back side of the sheets in the stack of media. The driver does not require the program to specifically support odd- and even-page printing, because the driver coordinates this function. Flip Pages Up option Select the Flip Pages Up check box to specify the duplex-binding option. (The Flip Pages Up option is only available when Print on Both Sides (Manually) is selected.) By default, the Flip Pages Up check box is not selected. The following table shows the results of selecting this box, depending on the paper orientation selected on the Finishing tab. Table 4-2 Page orientation Orientation (Finishing tab) Flip Pages Up selected Flip Pages Up not selected Portrait Short-edge binding Long-edge binding Landscape Long-edge binding Short-edge binding When Print on Both Sides (Manually) is selected, the document preview image changes to show a spiral binding along either the left edge or the top edge of the page. In addition, a folded-over corner appears in the lower-right portion of the preview image, indicating that printing occurs on the back side. An arrow on the folded-over corner points in the direction that the pages would be flipped if they were bound together. Short-side binding is for print jobs with pages that read by flipping over like the pages of a calendar. Long-side binding is for print jobs with pages that read by turning like the pages of a book. Booklet layout drop-down menu The Booklet Layout drop-down menu, visible when Print on Both Sides Manually is selected, offers choices that are based on the current paper size. The default setting for the Booklet Layout drop-down menu is Off. ● Left Binding ● Right Binding By selecting Left Binding or Right Binding, the document preview image changes to show the location of the binding. If the Pages per Sheet setting is on the default setting of 1, it automatically changes to 2 pages per sheet. Manually changing the Pages per Sheet setting to 4, 6, 9, or 16 pages per sheet disables the booklet setting. See the Printing a booklet on page 157 section of this chapter for more information. Book and booklet printing A book is a print job consisting of at least two pages that can have a different media type for the front cover, first page, other pages, last page, or back cover. Use the Front Cover, First Page, Other Pages, Last Page, and Back Cover settings on the Paper/Quality tab (available by selecting the Use Different Paper/Covers check box) to select different media for these pages. A booklet is a print job that places two pages on each side of a sheet that can be folded into a booklet that is half the size of the media type. Use the Booklet Layout drop-down menu on the Finishing tab to control booklet settings. 156 Chapter 4 HP PCL 5, PCL 6, and PS emulation drivers for Windows ENWW