HP LaserJet P4510 HP LaserJet P4010 and P4510 Series - Software Technical Refe - Page 229
Print Using, Print Using field, HP LaserJet P4010 and P4510 Series, Print, Using, IP Printer
View all HP LaserJet P4510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
b. Select the HP LaserJet P4010 and P4510 Series printer from the list. The software verifies that the printer is connected to the network and the Print Using field is automatically populated with the correct PPD for the device. Figure 5-17 Print Using field NOTE: If you are on a network that has more than one HP LaserJet P4010 and P4510 Series printer, print a configuration page and match the Bonjour Printer Name to the name on the list to identify the printer you are installing. NOTE: If the HP LaserJet P4010 and P4510 Series printer does not appear in the list, verify that the printer is on and connected to the network, then try turning the printer off and then on again. If the HP LaserJet P4010 and P4510 Series PPD does not appear in the Print Using pull-down list, turn the computer off and then on again, then restart the setup process. For more troubleshooting information, see Troubleshooting the printer setup on page 208. If you want to use the IP Printing method, carry out the following steps: a. Click the IP Printer tab. b. Choose HP Jet Direct - Socket from the Protocol pull-down menu. This is the recommended setting for HP printer. c. Print the configuration pages. ENWW Macintosh installation instructions 207 Macintosh