HP Presario B1000 Compaq Presario B1000 Notebook PC Series - Notebook Computer - Page 120

Upgrade Hard Disk

Page 120 highlights

Notebook User Guide 5. Insert the connector of the memory module into the socket. Make sure the notch of the memory module fits the nose of the socket. Ÿ Hold the memory module at a 30-degree angle and push its connector into the memory socket of the notebook. Ÿ Press down on the edge of the memory module until the locking tabs on both sides is locked. 6. Put the DIMM door back and secure the screw on the DIMM door. 7. Turn the system over. To remove a memory module, push the locking tabs aside from the memory module until the module pops up. Then, remove the memory module. UPGRADE HARD DISK Your notebook computer offers one 2.5" format, 9.5mm height hard disk. If the volume does not fit your need or it is crashed, you can upgrade it by replacing with new hard disk. Please do the following steps to change it. 1. Remove the battery pack 2. Push the locking bar. 3. Pull out the HDD by locking bar firmly and slowly. 120

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136

N
otebook User Guide
120
5.
Insert the connector of the memory module into the socket. Make sure the
notch of the memory module fits the nose of the socket.
±
Hold the memory module at a 30-degree angle and push its
connector
into the memory socket of the notebook.
±
Press down on the edge of the memory module until the locking
tabs on both sides is locked.
6.
Put the DIMM door back and secure the screw on the DIMM door.
7.
Turn the system over.
To remove a memory module, push the locking tabs aside from the memory
module until the module pops up. Then, remove the memory module.
U
PGRADE
H
ARD
D
ISK
Your notebook computer offers one 2.5" format, 9.5mm height hard disk. If the
volume does not fit your need or it is crashed, you can upgrade it by replacing
with new hard disk. Please do the following steps to change it.
1.
Remove the battery pack
2.
Push the locking bar.
3.
Pull out the HDD by locking bar firmly and slowly.