HP XM600 hp kayak xm600 series 1, user's guide for minitower models
HP XM600 - Kayak - 128 MB RAM Manual
View all HP XM600 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP XM600 manual content summary:
- HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 1
HP Kayak XM600 HP Kayak XU800 - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 2
- HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 3
and Drivers 20 2 Installing and Replacing Hardware Parts in Your PC Workstation 21 Removing and Replacing the Cover and Front Bezel 23 Removing and Replacing the Airflow Guide 25 Removing and Replacing a Processor 26 Removing, Replacing and Upgrading Memory on HP Kayak XM600 Models Shipped - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 4
User's Guide Contents Replacing the Rear Fan 54 Replacing the Fan and Speaker Assembly 56 System Board Switches 58 Replacing the Battery 60 3 Troubleshooting Your HP PC Workstation 61 If Your PC Does Not Start Properly 62 If Your PC Has a Hardware Problem 62 Using HP MaxiLife to Diagnose - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 5
trademarks of Microsoft Corporation. PentiumTM is a trademark of Intel Corporation. Rambus and RDRAM are registered trademarks of Rambus Inc. Direct Rambus, Direct RDRAM and RIMM are trademarks of Rambus Inc. Hewlett-Packard France Business Desktop Division (BDD) 38053 Grenoble Cedex 9 France © 1999 - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 6
WARNING WARNING WARNING WARNING Important Warnings Avoid Electrical Shocks To avoid electrical shock, do not open the power supply. There are no user-serviceable parts inside. To avoid electrical shock and harm to your eyes by laser light, do not open the laser module. The laser module should only - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 7
from whom you purchased your PC, or to HP so that they can either be recycled or disposed remove the communications board without first removing the connection to the telephone network. Unpacking Your PC Workstation If you in this manual (refer to page 77) before using your PC Workstation. You can - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 8
, and how to troubleshoot your PC Workstation Reference Operating System Online Help Start Help Contents Operating System User's Guide This guide Troubleshooting and Support HP Warranty and Support Guide HP Support and Information Services HP Troubleshooting Guide, downloadable from: http://www - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 9
go/kayaksupport, then select either HP Kayak XM600 or HP Kayak XU800 from the drop-down menu. This includes: • Troubleshooting Guide - provides troubleshooting information. • Technical Information - provides detailed information about your PC Workstation, including: System board switches, IRQs, DMAs - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 10
for HP Kayak XM600 and XU800 PC Workstations. Characteristics: Description: Weight (excl. keyboard and display) Dimensions Footprint Storage temperature Storage humidity Operating temperature Operating humidity Acoustic noise emission (as defined ISO 7779): • Operating (typical) Power supply HP - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 11
any doubt that you can lift the PC Workstation and the display safely, do not try to move them without help. 1 When you receive your PC Workstation, unpack all of the components. 2 Place the PC Workstation on a sturdy desk with easily accessible power outlets and enough space for the keyboard, mouse - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 12
automatically configured as soon as they are physically attached to the PC Workstation. USB accessories are not supported by all operating systems. Line Out Jack. The internal audio speaker is deactivated when you use the Line Out jack. External speakers should have a built-in power supply. 12 - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 13
MaxiLife and its Liquid Crystal Display (LCD) Hard Disk Activity Light HP MaxiLife and its LCD screen helps you diagnose problems with your PC Workstation and provides system information you may need to obtain support. Press one of the LCD control buttons to display the menu. Use to scroll through - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 14
multimedia keyboard models only). The keyboard power-on feature will work only if the appropriate system board switch is set (default setting = enabled). When you switch on the computer, it carries out the Power-On-SelfTest (POST) while the PC Workstation's logo is displayed. If you wish to view the - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 15
on, the HP PC Workstation's logo is displayed. The PC Workstation performs a Power-On-Self-Test (POST). 2 The software initialization process starts. It displays the software license agreement, gives you an opportunity to read Working in Comfort (ergonomics advice for computer users), then asks - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 16
files, or open sites on the WWW. • Launch the Internet browser supplied with your system. • Lock or suspend your PC Workstation. • Access HP TopTools and customer information. • Mute or adjust the volume of the audio system. • A headphone and microphone can be connected directly to the keyboard. For - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 17
upgrade accessories. To check the configuration: 1 Turn on the display and then the PC Workstation. If the PC Workstation is already turned on, save your data and exit all programs, then restart the PC Workstation. Consult your operating system documentation for any special instructions concerning - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 18
and Using Your PC Workstation Using the HP Setup Program Using the HP Setup Program Use the Setup program to configure your PC Workstation (for example: setting up system and user passwords, installing and upgrading mass storage devices), and to solve configuration problems. It is recommended that - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 19
Up and Using Your PC Workstation Setting Passwords in the HP Setup Program Setting Passwords in the HP Setup Program You can set passwords to provide different levels of protection for your PC Workstation, the Administrator password, the User password and the Power-on password. You set these - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 20
troubleshooting and makes remote administration easier. For more information about TopTools, connect to HP's web site at: www.hp.com/toptools. Software and Drivers In the "Software and Drivers" section of the HP support site http://www.hp.com/go/kayaksupport, then select either HP Kayak XM600 or HP - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 21
provides information about installing accessories and replacing hardware parts in your PC Workstation. HP UltraFlow Airflow Guide Power Supply Unit Rear Fan Spare mounting rails (not shown dealer for an up-to-date list of supported devices or check the HP web site: http://www.hp.com/go/kayak. - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 22
Hardware Parts in Your PC Workstation HP Kayak XM600 PC Workstation System Board Depending on the model, the memory module sockets support either: • Two RDRAM modules. • Two SDRAM modules installed in a Memory Expansion Card. Up to six accessory cards can be installed: - One Universal AGP PRO - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 23
notices on pages 6 and 7. 1 Switch off the display and computer. Disconnect all power cables and any LAN or telecommunications cables. 2 Unscrew the two thumb screws located at the back of the PC Workstation. 3 Standing at the back of the PC Workstation, slide the cover towards you until it clicks - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 24
Replacing Hardware Parts in Your PC Workstation Removing and the PC, lower the cover onto the chassis (aligning the guide rail on the bottom inside edge of the cover with the bottom edge of the PC chassis). 4 Shut the cover ensuring that the guides on the top of the cover slide into the rails at the - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 25
remove it from the PC Workstation's case. Replacing the HP UltraFlow Airflow Guide 1 Slide the HP UltraFlow Airflow Guide onto the processor fan housing until it clicks into place. 2 Replace the PC Workstation's cover (refer to page 24). Reconnect all the power and telecommunications cables. 25 - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 26
Single-processor systems can be upgraded to dual-processor systems by installing a second processor in the vacant processor slot. The second processor must be of the same type, speed and level-2 cache memory capacity as the first. 1 Switch off the display and PC Workstation. Disconnect all power - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 27
Module (VRM) socket on the system board. When installing a second processor, the VRM delivered with the processor accessory kit must be installed in this socket. A VRM is not required on the HP Kayak XM600 PC Workstation. 3 Replace the HP UltraFlow Airflow Guide (refer to page 25). 4 Replace - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 28
Parts in Your PC Workstation Removing, Replacing and Upgrading Memory on Kayak XM600 models Removing, Replacing and Upgrading Memory on Kayak XM600 models IMPORTANT NOTE This text was updated in December 2000 and replaces all earlier information on memory replacement in the HP Kayak XM600 - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 29
Parts in Your PC Workstation Removing, Replacing and Upgrading Memory on Kayak XM600 models Removing the Memory Expansion Card and SDRAM Modules You cannot upgrade with RDRAM memory until the Memory Expansion Card and all SDRAM memory has been removed. 1 Switch off the display and PC Workstation - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 30
and Replacing Hardware Parts in Your PC Workstation Removing, Replacing and Upgrading Memory on Kayak XM600 models Upgrading RDRAM Memory RDRAM models of the HP Kayak XM600 PC Workstation support one or two RAMBUS Direct RAM (RDRAM) memory modules Use only the HP memory modules provided for - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 31
and Upgrading Memory on Kayak XM600 models Removing and Replacing an RDRAM Module 1 Switch off the display and PC Workstation. Disconnect all power cables and any LAN or telecommunications cables. 2 Remove the PC Workstation's cover (refer to page 24 for instructions). 3 Remove the HP UltraFlow - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 32
Hardware Parts in Your PC Workstation Removing, Replacing and Upgrading Memory on Kayak XU800 models Removing, Replacing and Upgrading Memory on Kayak XU800 models IMPORTANT NOTE This text was updated in December 2000 and replaces all earlier information on memory replacement in the HP Kayak - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 33
2 Installing and Replacing Hardware Parts in Your PC Workstation Removing, Replacing and Upgrading Memory on Kayak XU800 models Replacing and Upgrading RDRAM Memory There is a single Memory Expansion Card connector on the system board for an RDRAM Memory Expansion Card. NOTE Do not install a - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 34
on the system board until the retaining clips click into position. Secure the Memory Expansion Card in place with the two retaining screws. 4 Replace the retaining bar and secure it in place with the screw. 5 Return the PC Workstation to its upright position. 6 Replace the HP Ultraflow Airflow Guide - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 35
Replacing Hardware Parts in Your PC Workstation Removing, Replacing and Upgrading Memory on Kayak XU800 models NOTE For PC Workstations with an onboard RIMM, place the PC on its side with the system board facing upwards for ease of installation.. For PC Workstations with a Memory Expansion Card - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 36
the cover (refer to page 24). Reconnect all cables and power cords. HP Kayak XM600 Upgrades The HP Kayak XM600 has five 32-bit 33 MHz, 5 V PCI accessory card slots and one Universal AGP PRO slot on the system board. HP Kayak XU800 Upgrades There are five PCI accessory card slots: • Three 32-bit - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 37
Parts in Your PC Workstation Removing and Replacing a PCI Accessory Card The following table shows the various PCI card installations for the different PCI slots on the HP Kayak Universal AGP PRO slot (Kayak XM600 and Kayak XU800) AGP Video Card1 Supported operation in the Universal AGP PRO Slot - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 38
Parts in Your PC Workstation Installing Mass Storage Devices Which IDE Data Connectors to Use Installing Mass Storage Devices The PC has an integrated Ultra ATA-66 controller that supports a CD-ROM drive installed in it. Refer to the drive's manual to see if you must set jumpers or if there is a - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 39
cable has one connector for a floppy drive. Refer to the drive's installation guide to check jumper settings or if there is a special installation procedure to follow. HP Kayak XM600 Cables and Connectors Primary IDE cable supports two Hard Disk Drives Two IDE data cables each with two 40-pin - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 40
Workstation Installing Mass Storage Devices HP Kayak XU800 Cables and Connectors Secondary IDE cable for access devices such as CD-ROM Drives, Zip Drives or Hard Disk Drives Primary IDE cable supports CD-ROM Drives 16-bit SCSI Terminator connector located on the system board (behind the processor - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 41
for HP Kayak XM600 and XU800 PCs Power Cable for 3.5-inch Floppy Disk Drive Power Cables for Hard Disk Drives, Zip Drives, Tape Drives, CD-RW, CD-ROM Drives and DVD drives Additional Guide Rails Attached on the side of the front access cage (inside the PC Workstation), additional guide rails - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 42
drive. Refer to your operating system documentation for information on how to do this. 1 Switch off the display and PC Workstation. Disconnect all power cables and any LAN or telecommunications cables. 2 Remove the PC Workstation's cover (refer to page 23 for instructions). 3 Disconnect the data and - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 43
Drive 2 Installing and Replacing Hardware Parts in Your PC Workstation Removing and Replacing the Primary Hard Disk Drive Configure the new hard disk drive with the same settings as the old one. 1 Add the short blue guide rails to the new hard disk drive. Insert the guide rail labeled "L" on the - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 44
IDE configuration. To install a second hard disk drive: 1 Switch off the display and PC Workstation. Disconnect all power cables and any LAN or telecommunications cables. 2 Remove the PC Workstation's cover (refer to page 23 for instructions). 3 If the primary hard disk drive is installed in the top - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 45
an Accessory in the Front Access Cage 1 Switch off the display and PC Workstation. Disconnect all power cables and any LAN or telecommunications cables. 2 Remove the PC Workstation's cover and front upper bezel (refer to page 23 for instructions). 3 Depending on the accessory to be installed, either - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 46
2 Installing and Replacing Hardware Parts in Your PC Workstation Installing an Accessory in the Front Access Cage 5 Align the guide rails on both sides of the drive with the internal shelf guides and then slide the drive until it clicks into position. 6 Connect the power and data cables to the - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 47
Drive (or DVD-Drive) 1 Switch off the display and PC Workstation. Disconnect all power cables and any LAN or telecommunications cables. 2 Remove the PC Workstation's cover and front upper bezel (refer to page 23 for instructions). 3 Disconnect the power and data cables from the old drive. 4 Place - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 48
display and PC Workstation. Disconnect all power cables and any LAN or telecommunications cables. 2 Remove the PC Workstation's cover and front upper bezel (refer to page 23 for these instructions). 3 Disconnect the power green guide rails by gently prying them off the drive. These guide rails will - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 49
message appears, follow the instructions provided by the Error Message system configuration will be updated automatically. 1 Switch on the computer. 2 To enter the SCSI Configuration Utility press when the message Press to start Configuration Utility... is displayed during the PC Workstation - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 50
and Replacing Hardware Parts in Your PC Workstation Replacing the Power Supply Unit Replacing the Power Supply Unit WARNING Removing the Power Supply Unit Hewlett-Packard does not support power supply upgrades. This information is provided to help you replace a defective power supply unit. For - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 51
Hardware Parts in Your PC Workstation Replacing the Power Supply Unit Installing the Power Supply Unit 1 Insert the new power supply unit. 2 Secure it in position using the three screws that you removed in steps 6 and 7. 3 Reconnect all internal power supply connectors. 4 Replace the HP UltraFlow - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 52
the System Board Removing the System Board Replacing the System Board 1 Switch off the display and PC Workstation. Disconnect all power cables and any LAN or telecommunications cables. 2 Remove the PC Workstation's cover (refer to page 23 for instructions). 3 Remove the HP UltraFlow Airflow Guide - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 53
9 Replace the PC Workstation's cover (refer to page 24). Reconnect all the power and telecommunications cables. 10 After installing the system board, you need to update your BIOS. NOTE The latest BIOS for your PC and instructions on updating the BIOS are available from: www.hp.com/go/kayaksupport - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 54
display and PC Workstation. Disconnect all power cables and any LAN or telecommunications cables. 2 Remove the PC Workstation's cover (refer to page 23 for instructions). 3 Remove the HP UltraFlow Airflow Guide cable from the connector on the system board. If required, refer to the connector layout - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 55
connector on the system board. Place the cable between the power supply unit and processor. 3 Align the processor fan clips with their corresponding sockets. 4 Gently push the rear fan towards the rear panel connectors, until it clicks into place. 5 Replace the HP UltraFlow Airflow Guide (refer to - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 56
4 For ease of installation, place the PC Workstation on its side with the system board facing upwards. 5 Remove the PC chassis retaining bar. 6 For Kayak XU800 PC Workstations, remove the Memory Expansion Card. If required, refer to page 33 for instructions. 7 Remove the screw from the front of - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 57
fan and speaker cables to their connectors located on the system board. 4 For HP Kayak XU800 PC Workstations, replace the Memory Expansion Card and secure it in place with the retaining screw. If required, refer to page 33 for instructions. 5 Replace the screw on the front of the chassis. 6 Replace - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 58
2 Installing and Replacing Hardware Parts in Your PC Workstation System Board Switches System Board Switches HP Kayak XM600 PC Workstation There are ten system board switches used for configuration, numbered from 1 to 10. Of these a certain number are reserved and should not be modified, otherwise - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 59
Replacing Hardware Parts in Your PC Workstation System Board Switches HP Kayak XU800 PC Workstation There are ten system board switches used for Enables User and System Administrator passwords. DOWN clears the passwords at next boot. 4 UP Retains CMOS memory. DOWN clears CMOS memory at next - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 60
Parts in Your PC Workstation Replacing or to the dealer from whom you purchased your PC Workstation, or to HP, so that they can be either recycled or disposed Disconnect the PC Workstation's power supply cord and any connection to a telecommunications network. 1 Remove the PC Workstation's cover ( - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 61
Questions. • What to do if you need more help. • What to do before contacting HP Support. For more detailed information, refer to the Troubleshooting Guide, available on HP's web site at http://www.hp.com/go/kayaksupport/, then select either HP Kayak XM600 or HP Kayak XU800 from the drop-down menu. - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 62
or a beep code when the PC starts up means there is a configuration problem with your PC. Check that... How The part of your configuration for which the Power-On Self Refer to "Using HP MaxiLife to Diagnose Problems" on page 64. Test has detected an error. Refer to the Troubleshooting Guide - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 63
page 69. The Power-On Self Test Results In an Error on HP MaxiLife Status Panel What to do • Refer to "Using HP MaxiLife to Diagnose Problems" on page 64. • Press F2 to enter Setup.1 1. For more information on the Setup program, refer to the Troubleshooting Guide, available on the HP web at: www - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 64
3 Troubleshooting Your HP PC Workstation Using HP MaxiLife to Diagnose Problems Pre-Boot Checks Using HP MaxiLife to Diagnose Problems Your HP LCD can help you to diagnose problems with your PC Workstation, even when you are unable to get your system and monitor working properly. When you press - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 65
that the memory modules are correctly installed. ERROR ! Mem MisCompare For HP Kayak XU800 models only. Check that RDRAM modules are correctly installed in pairs. Further information about RDRAM and SDRAM modules can be found on page 28 for the HP Kayak XM600 and page 32 for HP Kayak XU800 models - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 66
3 Troubleshooting Your HP PC Workstation Using HP MaxiLife to Diagnose Problems POST Phase Following these checks, the POST (Power-On Self Test) sequence is initiated. One of the following screens will appear in this phase: HP Kayak XM600 INFO SERVICES HP Kayak XU800 INFO SERVICES ERROR ERROR - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 67
the next time your PC Workstation is powered on. For support purposes, POST steps are shown as POST codes (for example, a post code = step xx in the Power-On Self Test) and displayed on the LCD as follows: HP Kayak XU800 POST Code xx Post steps will be displayed on the LCD the next time your PC - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 68
3 Troubleshooting Your HP PC Workstation Using HP MaxiLife to Diagnose Problems If an error is detected, an error screen appears indicating the problem. To continue viewing the test results of the other system components, press the control button. CPU Socket Next For example, if the processor is - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 69
hardware configuration. • Provide precise information to an HP support agent so they can solve any problems quickly and effectively. For more information about this utility, refer to the Vectra\Kayak Hardware Diagnostics User's Guide, available on the HP web site in PDF (Adobe Acrobat) format - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 70
3 Troubleshooting Your HP PC Workstation HP DiagTools Hardware Diagnostics Utility Starting HP DiagTools Producing a Support Ticket Resetting Setup Values From the hard disk drive: 1 Close all applications if you have not already done so. 2 Shutdown the computer with the Restart - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 71
3 Troubleshooting Your HP PC Workstation Image Creation and Recovery CD-ROM What Functions Are operating system media when installing additional drivers. • HP DiagTools: Checks the system configuration and operation. Also described on page 69. Requirements Before performing a recovery, upgrade or - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 72
Troubleshooting Your HP PC Workstation Image Creation and Recovery CD-ROM Performing a Recovery, Upgrade or Downgrade Running HP DiagTools NOTE Ì The PC model must match the CD-ROM, which contains a BIOS lock. Ì Save (if possible) data files and software applications. Ì It is recommended upgrading - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 73
does not have any SCSI drives, a message displaying "At least one service failed to start". You can remove the driver through the Control Panel > SCSI >. To complete the recovery, you will need to install drivers recommended by Hewlett-Packard which are available from the HP web site, or other - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 74
by a virus. Run the antivirus utility preloaded on your PC. If the problem continues, update your PC's BIOS. You can download the BIOS and updating instructions from www.hp.com/go/kayaksupport, then select either HP Kayak XM600 or HP Kayak XU800 from the drop-down menu. Q: I've been experiencing - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 75
manual is available from HP's web site at: www.hp.com/go/kayaksupport, then select either HP Kayak XM600 or HP Kayak XU800 from the drop-down menu. Some Troubleshooting Tips: • Restart your PC and see if the problem recurs. • Run HP DiagTools. You can create a hardware profile of your PC (Support - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 76
Troubleshooting Your HP PC Workstation Collecting Information Before Contacting HP Support Collecting Information Before Contacting HP Support It is recommended that before contacting HP Support you note down some of the information mentioned below. This will help HP support deal with your problem - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 77
important that you set up your work area correctly and use your HP equipment properly. With that in mind, we have developed some set- nerves, or tendons, become irritated or inflamed. RSI has been a reported problem for those who perform repetitive tasks such as assembly line work, meatpacking, - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 78
avoid RSI? What if I experience discomfort? The specific causes of RSI have not been established. Nevertheless, be sufficient to eliminate all potential problems. Maintaining good posture and positioning when Your Work Environment Your Chair When using HP computing equipment, it is important that - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 79
front of the seat should be curved and finished in a "waterfall" edge. • An adjustable back support in both height and forward and backward tilt. It is important that the backrest correctly supports the lower part, or lumbar curve, of the back. • A freely rotating swivel so you can move easily from - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 80
• Overall - Change your position frequently and take regular breaks to avoid fatigue. Setting Up Your HP Computing Equipment Your HP Monitor Make sure that all the elements of your HP computer system-monitor, document holder, keyboard, mice and other input devices, and headphones and speakers-are - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 81
When possible, use a program that has a simple user interface, such as easily identifiable icons and pull-down menus. Also, screen information should be displayed in a structured and well-organized way. Window Tilt Monitor Swivel Monitor Use Specifications • When viewing your monitor, your head - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 82
and as close to the monitor as possible to prevent neck twisting. Some users prefer a document holder mounted to the monitor while others prefer the document position that is most comfortable for you while you are using your system. • Because HP keyboards vary in depth, you'll want to be sure that - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 83
forearms with the keyboard tilted away from you. • When using your HP keyboard, remember it takes very little pressure or force from your fingers and wrists in a comfortable and neutral position when you are not typing. Some HP keyboards come with an integrated palm rest. If you use a palm rest, - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 84
may permanently damage your hearing. To avoid discomfort from unexpected noise, always turn down the volume before connecting headphones or speakers to your HP equipment. When you put on the headphones, slowly increase the volume until you find a comfortable listening level, then leave the volume - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 85
than 15 degrees, and try not to turn your head toward the side. • Back - While sitting at your work surface, make sure your back is supported by the chair's backrest in an erect position or angled slightly backwards. • Arms - Make sure your arms and elbows are relaxed and loose, with your - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 86
, prescription eyeglasses, anti-glare screens, and more. Seek additional information from the sources available to you, including your employer, doctor, local office supply store, and the Information Sources listed in the online version of Working in Comfort, preloaded on the hard disk of your - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 87
's Name:HEWLETT-PACKARD Manufacturer's Address:5 Avenue Raymond Chanas 38053 Grenoble Cedex 09 FRANCE Declares that the product: Product Name:Personal Computer Workstation Model Number:HP Kayak XM600 and HP Kayak XU800 Conforms to the following Product Specifications: SAFETY International - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 88
/TV technician for help. Hewlett-Packard's FCC Compliance Tests were conducted using HP-supported peripheral devices and HP shielded cables, such as those you receive with your system. Changes or modifications not expressly approved by Hewlett-Packard could void the user's authority to operate the - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 89
Never touch or remove the Communications board without first removing the connection to from whom you purchased your PC, or to HP so they can either be recycled or disposed , au revendeur où vous avez acheté votre ordinateur ou à Hewlett Packard, pourqu'elles soient recyclées ou rangées de manière - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 90
Read the instructions for correct operation. Notice for Korea Recycling Your PC HP has a strong commitment toward the environment. Your HP Personal Computer collected equipment is sent to one of HP's recycling facilities in Europe or the USA. As many parts as possible are reused. The remainder is - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 91
Hewlett-Packard has requested Customer to cure the failure and Customer has failed to do so within thirty (30) days of such notice. UPDATES AND UPGRADES. Customer agrees that the software does not include updates and upgrades which may be available from Hewlett-Packard under a separate support - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 92
in DFARS 252.227-7013. Hewlett-Packard Company, 3000 Hanover Street, Palo user customer with non-defective software along with written re-installation instructions. Reloading of the bundled, preloaded HP or non-HP software by HP or any of its designates is not covered by the HP warranty. Should HP - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 93
may be obtained from the nearest HP sales office or other location indicated in the owner's manual or service booklet. FOR CONSUMER TRANSACTIONS IN AUSTRALIA AND NEW ZEALAND: THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT LAWFULLY PERMITTED, DO NOT EXCLUDE, - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 94
94 - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 95
XM600 removing and replacing RDRAM module, 31 removing and replacing SDRAM module, 28 upgrading RDRAM memory, 31 HP Kayak XU800 memory upgrades for expansion card, 32, 33 HP MaxiLife, 13 boot steps, 67 configuring LCD, 66 diagnosing problems, 64 Diags, 67 POST sequence, 66 pre-boot checks, 64 system - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 96
memory upgrades RDRAM for HP Kayak XU800, 32 SDRAM for HP Kayak XU800, 33 monitor troubleshooting, 62 mouse troubleshooting, 63 multimedia models important warning, 6 multi-processor system, 26 N notice trademarks, 5 P password setting, 19 passwords system board switch, 58 PC Workstation overview - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 97
power consumption, 10 troubleshooting Frequently Asked Questions, 74 keyboard, 63 monitor, 62 mouse, 63 tips, 75 troubleshooting your PC, 61 U unpacking the PC Workstation, 11 updating BIOS, 75 upgrading SDRAM memory on HP Kayak XM600 models, 28 URL for downloadable documentation, 9 for downloading - HP XM600 | hp kayak xm600 series 1, user's guide for minitower models - Page 98
Index HP DualExpress!, 27 power management, 20 W warranty HP Software Product License Agreement, 91 working in comfort also consult preloaded version, 77 recommendations, 77 Y Year 2000 compliancy, 74 98
HP Kayak XM600
HP Kayak XU800