HP XM600 hp kayak xm600 series 1, user's guide for minitower models - Page 22
HP Kayak XM600 PC Workstation System Board
View all HP XM600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
2 Installing and Replacing Hardware Parts in Your PC Workstation HP Kayak XM600 PC Workstation System Board Depending on the model, the memory module sockets support either: • Two RDRAM modules. • Two SDRAM modules installed in a Memory Expansion Card. Up to six accessory cards can be installed: - One Universal AGP PRO (graphics) - Five 32-bit PCI slots Support for one or two processors Primary IDE Connector Secondary IDE Connector Floppy Disk Drive Connector HP Kayak XU800 PC Workstation System Board Single Memory Expansion Card Connector, supporting either four RIMM sockets or, four DIMM sockets Support for one or two Pentium III processors - PCI 1 slot (32-bits 33 MHz) - PCI 2 slot (32-bits 33 MHz) - PCI 5 slot (32-bits 33 MHz,) Floppy Disk Drive Connector Secondary IDE Connector - PCI 3 slot (64-bits 66 MHz) - PCI 4 slot (64-bits 66 MHz) One Universal AGP PRO 16-bit Internal U160 slot (graphics) 68-pin SCSI connector 22 VRM socket. Only to be used with second processor Primary IDE Connector