HP XM600 hp kayak xm600 series 1, user's guide for minitower models - Page 41
Power Connectors for HP Kayak XM600 and XU800 PCs, Additional Guide Rails, Device to be Installed
View all HP XM600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
2 Installing and Replacing Hardware Parts in Your PC Workstation Installing Mass Storage Devices You should assign an unused SCSI ID to the second SCSI hard disk drive (for example, SCSI ID 1). The SCSI ID is usually configured with jumpers on the SCSI hard disk drive. Refer to the installation guide supplied with the drive for information on selecting a SCSI ID. Some internal SCSI disk drives may have termination resistors that must be removed or disabled before installation in your computer. Refer to the drive's installation guide for more details and to see if there is a special installation procedure to follow. Power Connectors for HP Kayak XM600 and XU800 PCs Power Cable for 3.5-inch Floppy Disk Drive Power Cables for Hard Disk Drives, Zip Drives, Tape Drives, CD-RW, CD-ROM Drives and DVD drives Additional Guide Rails Attached on the side of the front access cage (inside the PC Workstation), additional guide rails are available for mass storage device installations. Depending on the device to be installed, dedicated guide rails are required and are easily recognized by their distinct size and color. The following table indicates the device, location, and required rails. Device to be Installed 3.5-inch device (hard disk drive) 5.25-inch device (CD-ROM, etc.) 3.5-inch device1 (zip drive or second floppy disk drive) Location Required Rails 3.5-inch internal shelf 5.25-inch front access cage shelf Short blue left and right rails (L or R indicated on the rail) Long green rails Short green left and right rails (L or R indicated on the rail) 1. Some models, a third hard disk drive can be installed. Refer to page 45 for installation instructions. 41