HP XM600 hp kayak xm600 series 1, user's guide for minitower models - Page 59

HP Kayak XU800 PC Workstation, Switch, Default Position, To Con Do Not change Default Setting

Get HP XM600 - Kayak - 128 MB RAM PDF manuals and user guides View all HP XM600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

2 Installing and Replacing Hardware Parts in Your PC Workstation System Board Switches HP Kayak XU800 PC Workstation There are ten system board switches used for configuration, numbered from 1 to 10. Of these a certain number are reserved and should not be modified, otherwise it could lead to a system failure. Switch Default Position To Configure: 1 UP Enables normal mode. DOWN enables the BIOS recovery mode at next boot. 2 UP Reserved. Do Not change Default Setting 3 UP Enables User and System Administrator passwords. DOWN clears the passwords at next boot. 4 UP Retains CMOS memory. DOWN clears CMOS memory at next boot. 5 UP Reserved 5-6. Do Not change Default Settings 6 DOWN 7 DOWN Enables keyboard power-on. UP disables this option. 8 DOWN 9 DOWN Reserved 8-10. Do Not change Default Settings 10 UP NOTE Switches can also be referenced as: UP = Open = Off (disable) DOWN = Close = On (enable) 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
2
Installing and Replacing Hardware Parts in Your PC Workstation
System Board Switches
59
HP Kayak XU800 PC Workstation
There are ten system board switches used for configuration, numbered
from 1 to 10. Of these a certain number are reserved and should not be
modified, otherwise it could lead to a system failure.
NOTE
Switches can also be referenced as:
UP = Open = Off (disable)
DOWN = Close = On (enable)
Switch
Default Position
To Configure:
1
UP
Enables normal mode.
DOWN enables the BIOS recovery mode at next boot.
2
UP
Reserved.
Do Not change Default Setting
3
UP
Enables User and System Administrator passwords.
DOWN clears the passwords at next boot.
4
UP
Retains CMOS memory.
DOWN clears CMOS memory at next boot.
5
UP
Reserved 5-6.
Do Not change Default Settings
6
DOWN
7
DOWN
Enables keyboard power-on.
UP disables this option.
8
DOWN
Reserved 8-10.
Do Not change Default Settings
9
DOWN
10
UP