HP XM600 hp kayak xm600 series 1, user's guide for minitower models - Page 31
Removing and Replacing an RDRAM Module, Remove the HP UltraFlow Airflow Guide.
View all HP XM600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2 Installing and Replacing Hardware Parts in Your PC Workstation Removing, Replacing and Upgrading Memory on Kayak XM600 models Removing and Replacing an RDRAM Module 1 Switch off the display and PC Workstation. Disconnect all power cables and any LAN or telecommunications cables. 2 Remove the PC Workstation's cover (refer to page 24 for instructions). 3 Remove the HP UltraFlow Airflow Guide. 4 To remove a memory module, open the two retaining clips and lift the module out of the socket. 5 To install a module, check that the two notches of the memory module are aligned with the two locating stubs in the socket (these ensure the module cannot be inserted in the reverse alignment). With the two retaining clips open, press the memory module completely into the socket. You hear two clicks as the retaining clips click into position. 6 Replace the HP UltraFlow Airflow Guide. 7 Replace the PC Workstation's cover. Reconnect all the power and telecommunications cables. 8 Power up the PC and check the HP Summary Screen to verify the new configuration. 31