HP XM600 hp kayak xm600 series 1, user's guide for minitower models - Page 35

Removing and Replacing a Memory Module, Replace the HP Ultraflow Airflow Guide refer

Get HP XM600 - Kayak - 128 MB RAM PDF manuals and user guides View all HP XM600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

2 Installing and Replacing Hardware Parts in Your PC Workstation Removing, Replacing and Upgrading Memory on Kayak XU800 models NOTE For PC Workstations with an onboard RIMM, place the PC on its side with the system board facing upwards for ease of installation.. For PC Workstations with a Memory Expansion Card, install memory modules directly onto the card without removing it from the system board. 4 If you intend to: a Install a Memory Module: For RIMM modules, unused memory sockets contain a continuity module. Open the two retaining clips and remove the continuity module from the socket. Store it for future use. b Replace a Memory Module: Open the two retaining clips and remove the old memory module. 5 Ensure the two notches of the Memory Module are aligned with those of the socket. With the two retaining clips open, press the memory module completely into the socket until the retaining clips click into position. 6 Replace the HP Ultraflow Airflow Guide (refer to page 25). 7 Replace the PC Workstation's cover. Reconnect all the power and telecommunications cables. 8 Check the HP summary screen to verify the new configuration (refer to page 17). 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
2
Installing and Replacing Hardware Parts in Your PC Workstation
Removing, Replacing and Upgrading Memory on Kayak XU800 models
35
NOTE
For PC Workstations with an onboard RIMM, place the PC on its side with
the system board facing upwards for ease of installation..
For PC Workstations with a Memory Expansion Card, install memory
modules directly onto the card without removing it from the system board.
4
If you intend to:
a
Install a Memory Module:
For RIMM modules, unused memory sockets contain a continuity
module. Open the two retaining clips and remove the continuity
module from the socket. Store it for future use.
b
Replace a Memory Module:
Open the two retaining clips and remove the old memory module.
5
Ensure the two notches of the Memory Module are aligned with those of
the socket. With the two retaining clips open, press the memory module
completely into the socket until the retaining clips click into position.
6
Replace the HP Ultraflow Airflow Guide (refer to page 25).
7
Replace the PC Workstation’s cover. Reconnect all the power and
telecommunications cables.
8
Check the HP summary screen to verify the new configuration (refer to
page 17).