HP XM600 hp kayak xm600 series 1, user's guide for minitower models - Page 57

Replacing the Fan, and Speaker, Assembly, For HP Kayak XU800 PC Workstations

Get HP XM600 - Kayak - 128 MB RAM PDF manuals and user guides View all HP XM600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

2 Installing and Replacing Hardware Parts in Your PC Workstation Replacing the Fan and Speaker Assembly Replacing the Fan and Speaker Assembly 1 Place the fan and speaker assembly behind the internal shelves (the speaker should be near the bottom edge of the chassis and facing towards the front of the PC Workstation). Ensure all cables are clear of the assembly, then carefully move the fan and speaker assembly towards the front of the chassis. 2 Align the clips and guide pins with their appropriate sockets and slide the assembly forward to secure it into place. 3 Connect the fan and speaker cables to their connectors located on the system board. 4 For HP Kayak XU800 PC Workstations, replace the Memory Expansion Card and secure it in place with the retaining screw. If required, refer to page 33 for instructions. 5 Replace the screw on the front of the chassis. 6 Replace the retaining bar and secure it in place with the retaining screw. 7 Return the PC Workstation to its upright position. 8 Replace the front upper and lower bezels and PC Workstation's cover (refer to page 24). Reconnect all the power and telecommunications cables. 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
2
Installing and Replacing Hardware Parts in Your PC Workstation
Replacing the Fan and Speaker Assembly
57
Replacing the Fan
and Speaker
Assembly
1
Place the fan and speaker assembly behind the internal shelves (the
speaker should be near the bottom edge of the chassis and facing
towards the front of the PC Workstation). Ensure all cables are clear of
the assembly, then carefully move the fan and speaker assembly towards
the front of the chassis.
2
Align the clips and guide pins with their appropriate sockets and slide
the assembly forward to secure it into place.
3
Connect the fan and speaker cables to their connectors located on the
system board.
4
For HP Kayak XU800 PC Workstations, replace the Memory Expansion
Card and secure it in place with the retaining screw. If required, refer to
page 33 for instructions.
5
Replace the screw on the front of the chassis.
6
Replace the retaining bar and secure it in place with the retaining screw.
7
Return the PC Workstation to its upright position.
8
Replace the front upper and lower bezels and PC Workstation’s cover
(refer to page 24). Reconnect all the power and telecommunications
cables.