Honeywell HJC4000 User Guide - Page 33
Step 3: Con the UltraKey Touch for Serial Port Settings, Slider_Up/Down
View all Honeywell HJC4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
UltraKey Touch Installation and User Guide 2. Press Login, and enter the password, 1234. This indicates that the keyboard is in PTZ mode. CAM 001 ST User2 This indicates that the keyboard is in DVR mode. CAM 001 DVR 1 ST User2 3. From the home screen, press Alt > Clr to enter the System Configuration menu. Scroll the slider or rotate System Configuration the joystick until System Configuration: Standalone Standalone Settings Settings displays. 4. Press Ent or rotate the slider to select DVR type. Standalone Set: DVR 5. Press Ent to enter the DVR Selection menu. Press the Slider_Up / Down to select the DVR to control. DVR Selection Fusion DVR Selection HRDP DVR Selection HRXD 6. Press Ent to enter the Basic Set menu. Press the Slider_Up/Down until the Port Select submenu displays. Basic Set: DVR/CAM Basic Set: PORT SELECT 7. Press Ent to enter the Port Select menu, then select the RS485 protocol to controll the DVR, then press Ent Port Select or Slider_Right to confirm. RS485 8. Return to the home screen. If the keyboard is in PTZ mode after changing to DVR Change to DVR mode? settings, then the home screen displays this message: Yes Select Yes or No to change the work mode of the keyboard. If the keyboard is in DVR mode after changing to DVR settings, then the home screen does not display that message. Step 3: Configure the UltraKey Touch for Serial Port Settings 1. Press Alt > Clr to exit from the DVR configuration menu. 2. Before using the UltraKey Touch keyboard to control Fusion/HRXD/HRSD/HRDP DVRs, it must be setup to meet the requirements. Set Com1 (RS485) according to Table 3-5 on page 34. Document 800-06554 Rev C 33 02/11