Honeywell HJC4000 User Guide - Page 67
System Administration Using the Web Browser, Logging into the Web Browser
View all Honeywell HJC4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
UltraKey Touch Installation and User Guide 3. Press Slider_Up/Down keys and press Ent to select one or all of the following test options: • Key: When you press a key, the key value and its state is displayed on LCD. Device Test: Key • Joystick: When you move the joystick, values which present the PTZ (pan, tilt, zoom) positions of the joystick are displayed on the LCD. Device Test: Joystick • SerialPort: Confirms that the controller serial port is functioning. Device Test: SerialPort • Slider: When you rotate the touch pad, specific values are displayed on the LCD. 4. Press Alt > Clr to exit from these test menus. Device Test: Slider System Administration Using the Web Browser Logging into the Web Browser 1. If not already done, navigate to, or copy and paste, the applicable IP address into your web browser: • LAN connections: for example, http://192.168.1.9. • Crossover cable connections - static address: http://192.168.1.9, and it must be consistent with the UltraKey Touch IP address (refer to network configuration). • In the User Name field enter Administrator (case sensitive). 2. In the Password field enter 1234 (default). 3. Click Login. Upgrading the UltraKey Touch Firmware 1. Log into the web browser. 2. From the top menu, click the Upgrade tab. The warning message Please make sure the network connection is connected during system upgrading displays (see Figure 5-1). 3. Click OK. The Software Upgrade menu opens. 4. Select a Folder from the drop-down list: Application, Kernel, or File System. 5. In the Select File field, click Browse. Navigate to the file and click OK. 6. Click Send to start the upgrade process. Document 800-06554 Rev C 67 02/11