IBM 9228 Service Guide - Page 58

Installing the hard drive backplate, drive cage see Installing a simple-swap drive in bay 4

Get IBM 9228 - IntelliStation Z - Pro PDF manuals and user guides
UPC - 000435947840
View all IBM 9228 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

13. If you are instructed to return the backplate, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you. Installing the hard drive backplate To install the hard drive backplate, complete the following steps. Retaining tab Retaining latch Hard drive backplate Locating pins Drive cage release tab Figure 18. Installing the hard drive backplate 1. Position the bottom edge of the backplate in the lower lip of the drive cage. 2. Tilt the top of the backplate toward the drive cage and over the locating pins until the retaining latch is engaged. 3. Connect the signal cables to the hard drive backplate. 4. Install the hard disk drive fan assembly (see "Installing the hard disk drive fan" on page 55) steps 2 and 3. 5. Reconnect the power cables to the system board. 6. Push the drive cage outward and press in on the drive-cage release lever; then, rotate the drive cage completely into the chassis. 7. Press down on the power-supply release latch and rotate the power supply into the chassis. Return the power-supply handle to the closed position. 8. Install the simple-swap hard disk drives that were removed from the hard disk drive cage (see "Installing a simple-swap drive in bay 4, 5, 6, or 7" on page 52). 9. Install the lower bezel (see "Installing the two-piece bezel" on page 35). 10. Install the side cover (see "Installing the side cover" on page 32). 11. Lock the side cover if you unlocked it during removal. 12. Reconnect the external cables and power cords; then, turn on the attached devices and turn on the computer. 40 IBM IntelliStation Z Pro Type 9228 and 9232: Problem Determination and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
13.
If you are instructed to return the backplate, follow all packaging instructions,
and use any packaging materials for shipping that are supplied to you.
Installing the hard drive backplate
To install the hard drive backplate, complete the following steps.
Retaining tab
Drive cage
release tab
Retaining
latch
Locating pins
Hard drive
backplate
1.
Position the bottom edge of the backplate in the lower lip of the drive cage.
2.
Tilt the top of the backplate toward the drive cage and over the locating pins
until the retaining latch is engaged.
3.
Connect the signal cables to the hard drive backplate.
4.
Install the hard disk drive fan assembly (see “Installing the hard disk drive fan”
on page 55) steps 2 and 3.
5.
Reconnect the power cables to the system board.
6.
Push the drive cage outward and press in on the drive-cage release lever;
then, rotate the drive cage completely into the chassis.
7.
Press down on the power-supply release latch and rotate the power supply
into the chassis. Return the power-supply handle to the closed position.
8.
Install the simple-swap hard disk drives that were removed from the hard disk
drive cage (see “Installing a simple-swap drive in bay 4, 5, 6, or 7” on page
52).
9.
Install the lower bezel (see “Installing the two-piece bezel” on page 35).
10.
Install the side cover (see “Installing the side cover” on page 32).
11.
Lock the side cover if you unlocked it during removal.
12.
Reconnect the external cables and power cords; then, turn on the attached
devices and turn on the computer.
Figure 18. Installing the hard drive backplate
40
IBM IntelliStation Z Pro Type 9228 and 9232: Problem Determination and Service Guide