IBM 9228 Service Guide - Page 83
Removing the front card/bracket assembly, from the chassis see
![]() |
UPC - 000435947840
View all IBM 9228 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Removing the front card/bracket assembly To remove the front card/bracket assembly, complete the following steps. Figure 41. Removing the card/bracket assembly 1. Read the safety information that begins on page vii and "Installation guidelines" on page 29. 2. Turn off the computer and all attached devices; then, disconnect all external cables and power cords. 3. Remove the side cover (see "Removing the side cover" on page 31). 4. Remove the bezel (see "Removing the two-piece bezel" on page 33). 5. Press the latch on the top of the assembly; the top of the assembly detaches from the chassis (see Figure 41). 6. Remove the tab on the bottom part of the assembly from the slot in the chassis. 7. Pull the assembly out slightly, and detach the two cables from the back of the assembly. 8. If you are instructed to return the card/bracket assembly, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you. Chapter 4. Removing and replacing computer components 65
![](/manual_guide/products/ibm-9228-service-guide-dc2b35d/83.png)