IBM 9228 Service Guide - Page 73
Installing the hard disk drive fan, To install the hard disk drive fan assembly
![]() |
UPC - 000435947840
View all IBM 9228 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Hard drive fan Hard drive baffle Figure 30. Removing the hard disk drive fan 9. Use side cutters to sever the four grommets that secure the fan to the duct, and remove the fan. Note: Grommets are provided with the replacement fan. 10. If you are instructed to return the hard disk drive fan assembly, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you. Installing the hard disk drive fan Attention: v Replace a failed fan within 48 hours. v To ensure proper cooling and airflow, do not operate the computer for more than 30 minutes with the side cover removed. To install the hard disk drive fan assembly, complete the following steps: 1. Position the fan so that the grommets protrude through the holes in the fan assembly; then, use needle-nose pliers to pull the grommets through the holes (see Figure 31). Chapter 4. Removing and replacing computer components 55
![](/manual_guide/products/ibm-9228-service-guide-dc2b35d/73.png)