IBM 9228 Service Guide - Page 68
Installing a drive in bay 1 - review
![]() |
UPC - 000435947840
View all IBM 9228 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Installing a drive in bay 1, 2, or 3 To install a drive in bay 1, 2, or 3 complete the following steps. Release buttons Drive retainer clip Figure 26. Installing a drive in bay 1, 2, or 3 1. If you are replacing a removed drive with a new drive, make sure that: v You have all the cables and other equipment that is specified in the documentation that comes with the new drive. v You check the instructions that come with the new drive to determine whether you must set any switches or jumpers on the drive. v You have removed the drive clip on the side of the original drive and have it available for installation on the new drive. Note: If you are installing a drive that contains a laser, review the following safety precaution. 50 IBM IntelliStation Z Pro Type 9228 and 9232: Problem Determination and Service Guide
![](/manual_guide/products/ibm-9228-service-guide-dc2b35d/68.png)