IBM 9228 Service Guide - Page 84
Installing the front card/bracket assembly
UPC - 000435947840
View all IBM 9228 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Installing the front card/bracket assembly To install the front card/bracket assembly, complete the following steps. Figure 42. Installing the card/bracket assembly 1. Attach the two cables to the back of the card/bracket assembly. 2. Install the bottom tab of the card/bracket assembly into the slot in the chassis; then, press the top of the assembly into the chassis. 3. Install the bezel (see "Installing the two-piece bezel" on page 35). 4. Install the side cover (see "Installing the side cover" on page 32). 5. Reconnect the external cables and power cords; then, turn on the attached devices and the computer. 66 IBM IntelliStation Z Pro Type 9228 and 9232: Problem Determination and Service Guide
Installing the front card/bracket assembly
To install the front card/bracket assembly, complete the following steps.
1.
Attach the two cables to the back of the card/bracket assembly.
2.
Install the bottom tab of the card/bracket assembly into the slot in the chassis;
then, press the top of the assembly into the chassis.
3.
Install the bezel (see “Installing the two-piece bezel” on page 35).
4.
Install the side cover (see “Installing the side cover” on page 32).
5.
Reconnect the external cables and power cords; then, turn on the attached
devices and the computer.
Figure 42. Installing the card/bracket assembly
66
IBM IntelliStation Z Pro Type 9228 and 9232: Problem Determination and Service Guide