Intermec CN51 CN51 Mobile Computer User Manual (with Android) - Page 114
Connect to an Ethernet Network, How to Connect to Virtual Private Networks, Advanced
View all Intermec CN51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Chapter 6 - Configure the Computer 3 Tap and then tap Advanced. The Advanced Wi-Fi menu appears. 4 Clear the Network notification check box to disable notifications. Connect to an Ethernet Network To connect the conputer to an Ethernet network, you need an Ethernet dock. 1 Make sure the dock is connected to your Ethernet network. 2 Place the computer in the dock. 3 Start the Settings app and make sure Ethernet is enabled (Ethernet is enabled by default). To enable Ethernet, slide the Ethernet switch on. When the switch turns blue, Ethernet is enabled. 4 Tap Ethernet. The Ethernet list shows the name of the current Ethernet connection. By default, the computer assumes a DHCP connection, and that your network has assigned an IP address automatically. If DHCP is working, the Ethernet dock should indicate that communication with the network is occurring. 5 (Optional) To assign a static IP address, tap the connection name (for example, eth0). The IP settings dialog box appears. a Tap DHCP and then select Static from the list. b Enter the required network information and then tap Apply. How to Connect to Virtual Private Networks The computer supports connecting to virtual private networks (VPNs). This section describes how to add and connect to VPNs. To configure VPN access, you must obtain details from your network administrator. You view and change VPN settings in the Settings app. Note: Before you can access VPNs, you must set a screen lock method. 102 CN51 Mobile Computer User Manual