Intermec CN51 CN51 Mobile Computer User Manual (with Android) - Page 64

Chapter 3 - Use the Scanner Code 128/GS1-128 Settings This section lists all settings for decoding the Code 128/GS1-128 symbology. Code 128/GS1-128 Settings and Descriptions Setting Code 128 GS1-128 ISBT 128 GS1-128 identifier Unconventional GS1-128 ISBT concatentation transmission Verify check digit Reading tolerance GTIN compliant Description Enables or disables decoding of Code 128. Default is enabled. Enables or disables decoding of GS1-128. Default is enabled. Enables or disables decoding of ISBT 128. Default is disabled. Enables or disables the GS1-128 Application Identifier (AI). The AI is a prefix code identifying the meaning and format of the data that follows it. Default is enabled. Enables or disables decoding of Unconventional GS1-128, a GS1-128 variant with two FNC1 characters at the beginning. Default is enabled. Enables or disables concatenated bar codes, allowing two bar codes to be read as if they were a single bar code. Options include: • Disable (default) • Concatenated code • Concatenated or single codes Sets the check digit for a higher level of security. The check character is positioned between the final data character and the stop character. Options include: • Disable (default) • French CIP Sets the quality of the bar code that the scanner reads. Options include: • High (default): Makes it easier to scan low quality bar codes. • Medium • Low: Bar codes must be high quality to be read. Enables or disables GTIN compliance. Default is disabled. 52 CN51 Mobile Computer User Manual