Intermec CN51 CN51 Mobile Computer User Manual (with Android) - Page 82
Standard 2 of 5 Settings, Standard 2 of 5 Settings and Descriptions
View all Intermec CN51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Chapter 3 - Use the Scanner Standard 2 of 5 Settings This section lists all configurable settings for decoding the Standard 2 of 5 symbology. Standard 2 of 5 Settings and Descriptions Setting Format Verify check digit Transmit check digit User defined symbology ID Code mark Description Sets the number of start/stop bars to use for decoding Standard 2 of 5. Options include: • Identicon, 6 s/s bars (default) • Comp Identics, 4 s/s bars Enables or disables the optional check digit for a higher level of security. Options include: • Disable (default) • Modulo 10 Enables or disables transmission of the check digit as part of the data in a bar code. Default is disabled. Sets the symbology ID for Standard 2 of 5. Range is 1 to 4 ASCII characters. \xFF is not supported. Default is B5. A one-character code mark that serves as an identifier for Standard 2 of 5. Default is D. 70 CN51 Mobile Computer User Manual