Intermec CN51 CN51 Mobile Computer User Manual (with Android) - Page 76
Maxicode Settings, Micro PDF417 Settings, Maxicode Settings and Descriptions
View all Intermec CN51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Chapter 3 - Use the Scanner Matrix 2 of 5 Length Mode Settings and Descriptions (Continued) Setting Length 2 Length 3 Description Restricts the length of the bar code that the scanner will read. Range is 0 to 255. Default is 0. Restricts the length of the bar code that the scanner will read. Range is 0 to 255. Default is 0. Maxicode Settings This section lists all configurable settings for decoding the Maxicode symbology. Maxicode Settings and Descriptions Setting Mode 0 User defined symbology ID Code mark Description Enables or disables Mode 0 for Maxicode. Default is disabled. Sets the symbology ID for Maxicode. Range is 1 to 4 ASCII characters. \xFF is not supported. Default is D2. A one-character code mark that serves as an identifier for Dutch Post. Default is *. Micro PDF417 Settings This section lists all configurable settings for decoding the Micro PDF417 symbology. Micro PDF417 Settings and Descriptions Setting Code 128 emulation User defined symbology ID Description Enables or disables Code 128 emulation for Micro PDF417. Default is disabled. Sets the symbology ID for Micro PDF417. Range is 1 to 4 ASCII characters. \xFF is not supported. Default is C7. 64 CN51 Mobile Computer User Manual