Intermec CN51 CN51 Mobile Computer User Manual (with Android) - Page 61
Code 39 Settings, Code 11 Length Mode Settings and Descriptions, Code 39 Settings and Descriptions
View all Intermec CN51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Chapter 3 - Use the Scanner Code 11 Length Mode Settings and Descriptions Setting Length Mode Length 1 Length 2 Length 3 Description Sets the length mode for decoding. Options include: • Length 1 minimum (default) • Lengths 1,2,3 fixed • Length 1 minimum, length 2 maximum Restricts the length of the bar code that the scanner will read. Range is 0 to 255. Default is 4. Restricts the length of the bar code that the scanner will read. Range is 0 to 255. Default is 0. Restricts the length of the bar code that the scanner will read. Range is 0 to 255. Default is 0. Code 39 Settings This topic lists all settings for decoding the Code 39 symbology. Code 39 Settings and Descriptions Setting Description Full ASCII conversion Enables or disables full ASCII conversion. Default is disabled. Start/stop transmission Enables or disables a special bar code character that provides the scanner with start and stop reading instructions as well as a scanning direction indicator. Default is disabled. Start character Sets the start character to $ only, *only, or both $ and *. Default is *. Verify check digit Sets the check digit for a higher level of security. The check character is positioned between the final data character and the stop character. Options include: • Disable (default) • Modulo 43 • French CIP • Italian CPI • HIBC • AIAG CN51 Mobile Computer User Manual 49