Intermec CN51 CN51 Mobile Computer User Manual (with Android) - Page 78
PDF417 Settings, PDF417 Settings and Descriptions, MSI Length Mode Settings and Descriptions Continued
View all Intermec CN51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Chapter 3 - Use the Scanner MSI Length Mode Settings and Descriptions (Continued) Setting Length 1 Length 2 Length 3 Description Restricts the length of the bar code that the scanner will read. Range is 0 to 255. Default is 6. Restricts the length of the bar code that the scanner will read. Range is 0 to 255. Default is 0. Restricts the length of the bar code that the scanner will read. Range is 0 to 255. Default is 0. PDF417 Settings This section lists all configurable settings for decoding the PDF417 symbology. PDF417 Settings and Descriptions Setting PDF with data length ID = 0 User defined symbology ID Code mark Description Enables or disables Irregular PDF to read bar codes with symbol length descriptor set to 0. Default is disabled. Sets the symbology ID for PDF417. Range is 1 to 4 ASCII characters. \xFF is not supported. Default is C7. A one-character code mark that serves as an identifier for PDF417. Default is *. Macro PDF417 Setting and Description Setting Transmit control header Description Enables or disables transmission of the control header for Macro PDF417. Default is disabled. 66 CN51 Mobile Computer User Manual