Intermec CN51 CN51 Mobile Computer User Manual (with Android) - Page 85
TLC 39 Settings, Con the Scanner Decode Security Settings
View all Intermec CN51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Chapter 3 - Use the Scanner TLC 39 Settings This section lists all the configurable settings for decoding the TLC 39 symbology. TLC 39 Settings and Descriptions Setting Linear only transmit mode ECI Security User defined symbology ID Code mark Description Enables or disables linear only transmit mode. When enabled, the computer only transmits the linear part of the bar code. Default is disabled. Sets the security level used when reading TLC 39 bar codes if EDI has been found and Code 39 is enabled. The higher the value, the more secure the decoding, but higher values can interfere with decode speed. Range is 0 to 64. Default is 10. Sets the symbology ID for TLC 39. Range is 1 to 4 ASCII characters. \xFF is not supported. Default is H0. A one-character code mark that serves as an identifier for TLC 39. Default is *. Configure the Scanner Decode Security Settings You use the Settings app to set options for decode security. These settings ensure that the computer decodes bar codes correctly and securely. 1 Start the Settings app and tap Scanners > Internal Scanner > Decode Security. 2 Tap a setting in the list to change it. Your changes are automatically saved. CN51 Mobile Computer User Manual 73