Intermec CN51 CN51 Mobile Computer User Manual (with Android) - Page 62

Chapter 3 - Use the Scanner Code 39 Settings and Descriptions (Continued) Setting Description Reading range Sets the reading range. Options include: • Normal • Extended (default) Reading tolerance Sets the quality of the bar code that the scanner reads. Options include: • High (default): Makes it easier to scan low quality bar codes. • Medium • Low: Bar codes must be high quality to be read. Transmit check digit Enables or disables sending the check digit as part of the bar code data. Default is disabled. Unconventional Code Enables or disables decoding of Unconventional 39 Code 39, including bar codes with a large intercharacter gap or a large narrow and wide element ratio. Default is disabled. Code 39 User defined Sets the symbology ID for Code 39. Range is 1 to 4 symbology ID ASCII characters. \xFF is not supported. Default is B1. Code 39 Code mark A one-character code mark that serves as an identifier for Code 39. Default is *. Code 39 Length Mode Settings and Descriptions Setting Length Mode Length 1 Length 2 Length 3 Description Sets the length mode for decoding. Options include: • Length 1 minimum (default) • Lengths 1,2,3 fixed • Length 1 minimum, length 2 maximum Restricts the length of the bar code that the scanner will read. Range is 0 to 255. Default is 0. Restricts the length of the bar code that the scanner will read. Range is 0 to 255. Default is 0. Restricts the length of the bar code that the scanner will read. Range is 0 to 255. Default is 0. 50 CN51 Mobile Computer User Manual