Intermec CN51 CN51 Mobile Computer User Manual (with Android) - Page 65

Chapter 3 - Use the Scanner Code 128/GS1-128 Settings and Descriptions (Continued) Setting Description Length Mode Sets the length mode for decoding. Options include: • Length 1 minimum (default) • Lengths 1,2,3 fixed • Length 1 minimum, length 2 maximum Length 1 Restricts the length of the bar code that the scanner will read. Range is 0 to 255. Default is 0. Length 2 Restricts the length of the bar code that the scanner will read. Range is 0 to 255. Default is 0. Length 3 Restricts the length of the bar code that the scanner will read. Range is 0 to 255. Default is 0. Code 128 User defined Sets the symbology ID for Code 128. Range is 1 to 4 symbology ID ASCII characters. \xFF is not supported. Default is B3. Code 128 Code mark A one-character code mark that serves as an identifier for Code 128. Default is D. GS1-128 User defined Sets the symbology ID for GS1-128. Range is 1 to 4 symbology ID ASCII characters. \xFF is not supported. Default is C9. GS1-128 Code mark A one-character code mark that serves as an identifier for GS1-128. Default is D. Datamatrix Settings This section lists the configurable settings for decoding the Datamatrix symbology. Datamatrix Settings and Descriptions Setting Mirrored labels User defined symbology ID Code mark Description Enables or disables reading mirrored labels. Default is disabled. Sets the symbology ID for Datamatrix. Range is 1 to 4 ASCII characters. \xFF is not supported. Default is D0. A one-character code mark that serves as an identifier for Datamatrix. Default is *. CN51 Mobile Computer User Manual 53