Intermec CN51 CN51 Mobile Computer User Manual (with Android) - Page 74
Japan Post Settings, Interleaved 2 of 5 Length Mode Settings and Descriptions
View all Intermec CN51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Chapter 3 - Use the Scanner Interleaved 2 of 5 Settings and Descriptions (Continued) Setting Code mark Description A one-character code mark that serves as an identifier for Interleaved 2 of 5. Default is I. Interleaved 2 of 5 Length Mode Settings and Descriptions Setting Mode Length 1 Length 2 Length 3 Description Sets the length mode for Interleaved 2 of 5 decoding. Options include: • Length 1 minimum (default) • Lengths 1,2,3 fixed • Length 1 minimum, length 2 maximum Restricts the length of the bar code that the scanner will read. Range is 0 to 255. Default is 6. Restricts the length of the bar code that the scanner will read. Range is 0 to 255. Default is 0. Restricts the length of the bar code that the scanner will read. Range is 0 to 255. Default is 0. Japan Post Settings This section lists all the configurable settings for decoding the Japan Post symbology. Japan Post Settings and Descriptions Setting Transmit check digit User defined symbology ID Description Enables or disables transmission of the check digit as part of the bar code data. Default is disabled. Sets the symbology ID for Japan Post. Range is 1 to 4 ASCII characters. \xFF is not supported. Default is P5. 62 CN51 Mobile Computer User Manual