Intermec CN51 CN51 Mobile Computer User Manual (with Android) - Page 60
Codablock F Settings, Code 11 Settings, Codablock F Settings and Descriptions
View all Intermec CN51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Chapter 3 - Use the Scanner Codablock F Settings This section lists all configurable settings for decoding the Codablock F symbology. Codablock F Settings and Descriptions Setting User defined symbology ID Code mark Description Sets the symbology ID for Codablock F. Range is 1 to 4 ASCII characters. \xFF is not supported. Default is K1. A one-character code mark that serves as an identifier for Codablock F. Default is *. Code 11 Settings This section lists all configurable settings for decoding the Code 11 symbology. Code 11 Settings and Descriptions Setting Verify check digit Transmit check digit User defined symbology ID Code mark Description Sets the check digit to 1 or 2 digits. Default is 2. Enables or disables transmission of the check digit as part of the bar code data. Default is enabled. Sets the symbology ID for Code 11. Range is 1 to 4 ASCII characters. \xFF is not supported. Default is C1. A one-character code mark that serves as an identifier for Code 11. Default is *. 48 CN51 Mobile Computer User Manual