Intermec CN51 CN51 Mobile Computer User Manual (with Android) - Page 75
Matrix 2 of 5 Settings, Matrix 2 of 5 Settings and Descriptions
View all Intermec CN51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Chapter 3 - Use the Scanner Japan Post Settings and Descriptions (Continued) Setting Code mark Description A one-character code mark that serves as an identifier for Japan Post. Default is *. Matrix 2 of 5 Settings This section lists all the configurable settings for decoding the Matrix 2 of 5 symbology. Matrix 2 of 5 Settings and Descriptions Settings Start/Stop User defined symbology ID Code mark Descriptions Enables or disables a special bar code character that provides the scanner with start and stop reading instructions. Options include: • Regular (default) • ChinaPost Sets the symbology ID for Matrix 2 of 5. Range is 1 to 4 ASCII characters. \xFF is not supported. Default is B4. A one-character code mark that serves as an identifier for Matrix 2 of 5. Default is D. Matrix 2 of 5 Length Mode Settings and Descriptions Setting Mode Length 1 Description Sets the length mode for Matrix 2 of 5 decoding. Options include: • Length 1 minimum (default) • Lengths 1,2,3 fixed • Length 1 minimum, length 2 maximum Restricts the length of the bar code that the scanner will read. Range is 0 to 255. Default is 6. CN51 Mobile Computer User Manual 63