Kenmore 19110 Owners Manual - Page 37
Winding, Bobbin, Setting
UPC - 883073000043
View all Kenmore 19110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Winding the Bobbin Removing the bobbin Slide the hook cover release button to the right, and remove the hook cover. Lift the bobbin out. _i_ Hook cover release button _2_Hook cover @ _3_ Bobbin Setting the spool of thread Place the spool of thread on the spool pin with the thread coming off the spool as shown. • For an ordinary spool: Use the large spool holder. _i_ Large spool holder • For a narrow or small spool: Use the small spool holder. _2_ Small spool holder • Additional s The additional unthreading Set the spoc place the felt !le. (0 Spool C2_Additional sp _3_Felt _4_Spool stand _5_Hole for the additional spool pin spool pin, Winding the bobbin NSeOtTtEhe: speed control lever at.._ for bobbin winding. [i_ Guide the thread around the bobbin winder thread guide. _i_ Bobbin winder thread guide [21 Insert the thread through the hole on the bobbin, threading from the inside to the outside. Put the bobbin on the bobbin winder spindle. _2_Bobbin winder spindle [31 Push the bobbin winder spindle to the right. The LED display shows _. [3 With the free end of the thread held in your hand, depress the foot control. Stop the machine when the bobbin has made a few turns, and cut the thread close to the hole on the bobbin. [5] Depress the foot control again. When the bobbin is fully wound, it will stop automatically. Return the bobbin to its original position by moving the spindle to the left, and cut the thread as shown. \ J