Kenmore 19110 Owners Manual - Page 89

Quilting Machine setting 01 01 _i_ Pattern I + _2_LED display I I + _3_Foot A: Zigzag foot _4_Quilting bar Loosen the quilting bar screw on the back of the foot holder and insert the quilting bar into the hole. Set the quilting bar at the desired position and tighten the screw to secure it. Sew tracing the previous seam with the quilting bar t keep constant seam spacing. _i_ Quilting bar screw _2_ Hole _3_Quilting bar _4_Seam spacing Pin Tucking Machine setting 02 02 _i_ Pattern I I _2_LED display I _3_Foot G: Blind hem foot Fold the fabric with wrong side together. Position the fabric so that the needle pierces 0.1-0.2 cm (1/16")inside of the folded edge, and lower the foot. Turn the guide screw and move the guide next to the folded edge. Sew guiding the folded edge along the guide. Open the fabric and press the tucks to one side. _i_ Guide screw _2_Guide _3_Folded edge ,_,,--,}