Kenmore 19110 Owners Manual - Page 97
Bobbin Holder and Needle Plate
UPC - 883073000043
View all Kenmore 19110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Cleaning Hook Race and Feed Dog WARNING: Raise the presser foot and needle, and then unplug the machine. DO NOT dismantle the machine other than as explained in this section. [i7 Remove the needle and presser foot. _i_ Screwdriver _2_Setscrew _3_Needle plate [2J Remove the setscrew and needle plate. [i_i1Take out the bobbin and bobbin holder. [13Clean the bobbin holder with dry cloth. _4_Bobbin brush and: [::_JBrush out _: the hookrac_ _lint from i feed dog and clean i _ti_i_ _. [116W1ipe inside of the hook race with a dry cloth. NOTES: You may use vacuum cleaner. This machine does not require oiling. [iii C) [ZI Replacing Bobbin Holder and Needle Plate [_] Insert the bobbin holder. Make sure to fit the knob next to the stopper in the hook race. _5_Guide pins _6_Knob _7_Stopper [9] Insert the bobbin and attach the needle plate aligning the holes with the guide pins. _8_Holes [10]Tighten the setscrew firmly. _9_Setscrew NOTE: After cleaning the machine, attach the needle and presser foot.