Kenmore 19110 Owners Manual - Page 77

Zipper Sewing Machine setting _i_ Pattern _2_LED display _3_Foot 01 E: Zipper foot Attaching the zipper foot To sew on the left side of the zipper, attach the foot holder to the right pin on the zipper foot. To sew on the right side of the zipper, attach the foot holder to the left pin on the zipper foot. _i_ Groove _2_Pin _3_To sew left side _4_To sew right side Fabric preparation Add 3/8" (lcm)to the zipper si overall opening size. _i_ Right side _2_Opening _3_Zipper _4_3/8" (1 _5_End of _6_Slider _7_Zipper te _8_Zipper This is the Place right sides of fabri_ _ogether and sew a bottom seam 3/4" (2 cm) from the fabric edge to the estimated zipper bottom stop position. Sew in reverse a few stitches to lock. Increase the stitch length to 5.0, set the needle thread tension to 0, and baste the entire length of the zipper opening. _9_Bottom seam _ Zipper bottom stop position _ Reverse stitch _ Basting stitch _i_ 3/4" (2 cm) • Starting to sew [iq Attach the zipper foot on the right-hand side of the pin. Fold back the upper layer seam allowance. Fold back the lower layer seam allowance to form a 1/8" (0.3 cm) margin of the fabric. Place the zipper teeth next to margin edge and pin margin to the zipper tape. Return the stitch length and thread tension to the original settings. Lower the zipper foot so it aligns with the zipper teeth. Sew from the bottom stop to the entire length of the zipper tape, removing pins as you go. _i_ Upper layer _2_Lower layer _3_1/8" (2 cm) margin _4_ Margin edge _5_Bottom stop _6_ Zipper length 01 I I + ®