Kenmore 19110 Owners Manual - Page 79
along the zipper teeth.
UPC - 883073000043
View all Kenmore 19110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Zipper Sewing (continued) f [21 Sew through all layers the entire length of the % zipper tape, removing the pins as you go. Stop the machine about 2" (5cm) before the zipper foot reaches the pull tab. Lower the needle slightly into the fabric. Raise the zipper foot and unzip a few inches to clear a path for the stitches. Lower the foot and stitch the remainder of the seam. _i_ Pull tab _2_2" (5cm) [31Remove the fabric and close the zipper. Take the upper fabric layer and lay it flat on the zipper. the upper fabric layer to the zipper tape. _3_Wrong side of upper fabric _4_Basting stitch _5_Right side of fabric _6_Zipper tape [13Raise and side of the to the right and stitch guiding the edge ol :-hand % bottom stop, up h. Turn fabric 90 ° zipper tape, along the zipper teeth. % [5_Before reaching pull-tab, stop the machine with needle in fabric and raise the foot. Use seam ripper to open a few inches of basting stitches, then unzip a few inches to clear a path for the stitch. _7_Basting stitches [61Lower the foot and stitch the remainder of the % seam, making sure the fold is even. At the end of the seam, sew in reverse a few stitches to lock. Once both sides of zipper are sewn, use seam ripper to open the basting stitch.