Kenwood TH-D74A User Manual 1 - Page 10

GETTING ACQUAINTED KEY AND CONTROL KNOB OPERATIONS Speaker LCD Display Microphone SP/MIC Jacks microSD memory card slot MicroUSB Connector (USB2.0, Type B) DC IN (External power supply) Jack [] Press [ ] (1s) to turn the transceiver power ON and OFF. Press [ ] to turn the backlight ON and OFF when the transceiver power is ON. The backlight turns OFF when the backlight timer elapses. When the voice guidance function is not set to OFF, the voice announces the operating states of the transceiver. When pressing [ ] while announcing, the voice stops. [MONI] Press and hold [MONI] to unmute the speaker in order to monitor signals. Release [MONI] to return to normal operation. Press [F], [MONI] to enter the Squelch level adjustment mode. [PTT] Press and hold [PTT], then speak into the microphone to transmit. [ENC] Control Rotate the [ENC] control to select an operating frequency, Memory channel, Menu item, setting value and change the scan direction, etc. [VOL] Control Rotate the [VOL] control to adjust the speaker volume. Multi-Scroll Key [ ], [ ] Press [ ] or [ ] to select an operating frequency, Memory channel, Menu item, setting value or to change the scan direction, etc. Press and hold [ ] or [ ] to change an operating frequency, Memory channel, Menu item, setting value, etc. continuously. [] Press and hold [ ] to select a frequency band in VFO mode. Press [ ] to move to the next step in various setting modes. [] Press and hold [ ] to select a frequency band in VFO mode. Press [ ] to move back to the previous step in various setting modes. [ENT] Press [ENT] to enter frequency direct entry mode in VFO mode. Press [ENT] to complete the setting value and move to the next step in Menu mode or various setting modes. [MODE] Press [MODE] to select the mode. Press [F], [MODE] in DV mode or DR mode to enter Digital Function Menu mode. This key operates the function displayed in the lower left side. (Refer to page 15.) [MENU] Press [MENU] to enter Menu mode. Press [F], [MENU] to cycle the transmit output power. [A/B] Press [A/B] to select operation band A or B. Press [F], [A/B] to switch the Single band mode and Dual band mode. This key operates the function displayed in the lower right side. (Refer to page 15.) [F] Press [F] to enter Function select mode. Press [F] (1s) to turn the transceiver Key lock function ON and OFF. 12 Keypad [VFO] (1) Press [VFO] to enter VFO mode. In Memory channel or CALL channel, press [F], [VFO] to copy the current Memory channel or Call channel to the VFO (memory shift). 8