Kenwood TH-D74A User Manual 1 - Page 43

microSD Memory Card SUPPORTED microSD MEMORY CARD Note: ◆◆ A microSD memory card or microSDHC memory card is not supplied with this transceiver. Purchase a commercially available product. ◆◆ A microSDXC memory card can not be used with this transceiver. The following table shows the microSD memory card and microSDHC memory card for which JVCKENWOOD has verified operation. In this manual, microSD memory cards and microSDHC memory cards are referred to as microSD memory cards. Memory Card Size microSD 2 GB 4 GB microSDHC 8 GB 16 GB 32 GB • Regardless of the above table, JVCKENWOOD does not guarantee the operation of all microSD memory cards. • The operation of a microSD memory card formatted with other than the transceiver is not guaranteed. • The larger the capacity of the microSD memory card used, the longer it takes to recognize the microSD memory card. • Please note that the data in the microSD memory card may be damaged or erased in cases such as the following. • If the microSD memory card is removed without performing the [Safely Remove] operation (unmount). • If the battery pack or battery case is removed during operation. • If the battery pack or alkaline batteries run out of power during operation. • If the power from an external power supply suddenly stops without installing the battery pack. INSERTING/ REMOVING A microSD MEMORY CARD Inserting (Mounting) a microSD Memory Card 1 Switch OFF the power of the transceiver. 2 Open the cap of the microSD memory card slot on the side. 3 Insert the microSD memory card. • With the contacts of the microSD memory card atthe front, insert the microSD memory card into the [microSD memory card slot] until you hear it lock into place with a click. The transceiver automatically recognizes the microSD memory card and < > flashes on the display. It changes to always displayed if the card enters the readable/writable state correctly. Note: ◆◆ When inserting a microSD memory card, do not touch its contacts. ◆◆ Do not remove a microSD memory card while data is being written or read. Doing so may cause the data on the microSD memory card to be damaged or erased. 4 Close the cap. Close the cap of the microSD memory card slot on the side properly. microSD Memory Card Slot Cap microSD Memory Card (insert the metal contact side) Note: ◆◆ Do not insert a microSD memory card the opposite way around or use force to insert it. Doing so may damage the microSD memory card or slot. Removing (Unmounting) a microSD Memory Card When removing a microSD memory card, be sure to perform the operation to safely remove (unmount) it. Note: ◆◆ Removing a microSD memory card without unmounting it correctly may damage it. 1 Access Menu No. 820. The microSD memory card is unmounted. When unmounting is completed, the completed confirmation screen appears. 2 Press [A/B]. Unmounting completes and the frequency screen reappears. 3 Remove the microSD memory card. • When removing a microSD memory card, push until you hear it unlock with a click and remove it. FORMATTING A microSD MEMORY CARD When using a new microSD memory card, format the microSD memory card as described below. All the data in the microSD memory card will be erased when the microSD memory card is formatted. 1 Insert the microSD memory card into the transceiver. 2 Switch ON the power of the transceiver. 3 Access Menu No. 830. The format confirmation screen appears. 4 Press [A/B]. Formatting begins. When formatting is completed, the completed confirmation screen appears. 5 Press [A/B] again. Formatting completes and the frequency screen reappears. 41