Kenwood TH-D74A User Manual 1 - Page 27
Built-in Gps Function On/ Off, Built-in Gps Setup
![]() |
View all Kenwood TH-D74A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
GPS BUILT-IN GPS FUNCTION ON/ OFF 1 Access Menu No. 400 and start the setting. GPS satellite information c a b 2 Select [On] or [Off]. [On]: Turns on the built-in GPS function. [Off]: Turns off the built-in GPS function. • When the built-in GPS receiver is On, the < > indicator appears on the display and flashes during positioning. • You must set the time zone beforehand, through Menu No. 950. • When determining your position for the first time after the power supply is turned On, the clock data is automatically set and is updated once per day thereafter. Displaying Position Information When the built-in GPS receiver is On, pressing [F], [MARK] will display "Latitude/longitude, time, altitude, heading, speed", then press [ ] to cycle the display between "Latitude/longitude, time, altitude, heading, speed" ➡ "Target point distance, Travel direction" ➡ "GPS satellite information". • Press [ ] returns to the previous display. Latitude/longitude, Time, Altitude, Heading, Speed a b c d f e g a Latitude b Longitude c Grid square locator d Altitude e Time f Heading g Speed Target point distance, Target direction a b a Target direction b Target point distance • When pressing [F] while the target point distance/ target direction is displayed, the North Up display (displays North as the top) changes to the Heading Up display (displays the current travel direction as the top) or vice-versa. In the Heading Up display, a "+" or "-" is used to help indicate the traveling direction. a Sky view b Satellite signal-strength bars c 2D: Latitude/Longitude positioning 3D: Latitude/Longitude and Altitude positioning • The sky view shows the satellites you are receiving. The satellite signal-strength bars indicate the strength of each satellite you are receiving. A solid bar indicates that the GPS satellite is ready for use. • When only the frame of the signal-strength bar is displayed, no contact with the satellite has yet been made Note: ◆ When GPS cannot be received, turn the power ON in a clear environment (Open Sky). BUILT-IN GPS SETUP You can select whether to use the transceiver function together with the built-in GPS receiver function or to use the built-in GPS receiver function only. Built-in GPS Operation Mode 1 Access Menu No. 403. 2 Select [Normal] or [GPS Receiver]. Restart information appears. 3 Press [A/B] to restart the transceiver with the selected mode. [Normal]: The display continues to show your frequency. You can use it as a normal transceiver. [GPS Receiver]: The display shows only GPS information. The transceiver transmit and receive capabilities are turned OFF, and only GPS operation is available. GPS Receiver mode display 25
![](/manual_guide/products/kenwood-thd74a-user-manual-7a922ab/27.png)