Kenwood TH-D74A User Manual 1 - Page 40

D-STAR Editing the Callsign You can edit the information of the Callsign. 1 Access Menu No. 220. The Callsign list selection screen appears. Half interrupt screen 2 Press [A/B]. The Callsign list editing screen appears. Note: ◆ The change of the transmission setting are temporary. After display hold time elapses, it returns to the previous transmission setting. ◆ When receiving the repeater frequency in DV mode, you can not reply to a received call by pressing [PTT]. Setting Direct Reply to Off 1 Access Menu No. 612. 3 Select the item and press [ENT]. The editing screen for the selected item appears You can register or edit the name, Callsign, and memo, etc. 4 Press [ENT] after editing. Editing are completed and the Callsign list editing screen appears. 5 Press [A/B]. The Callsign list selection screen appears. Sorting the Callsign You can sort the Callsign list. 1 Press [MODE] in the Callsign list selection screen. The move position selection screen appears. 2 Select a move position and press [A/B]. When you move an item to the end of the list, select [Move to End] and press [A/B]. DIRECT REPLY This function allows you to reply to a received call by simply pressing [PTT] while displaying the interrupt screen in DV and DR mode. The default setting is [On]. When a repeater signal is received in a DR mode and you immediately reply to a CQ or a call to your Callsign, the transmission setting is temporarily changed automatically and you can reply by simply pressing [PTT]. The < > icon appears in the interrupt screen when a direct reply is possible in receiving a call. If [PTT] is pressed when this icon appears, the setting is automatically changed to the reply setting and transmission becomes possible. Entire interrupt screen 2 Select [Off]. Note: ◆ You can change the display hold time by Menu No. 643. ◆ Direct reply is not possible when display method (Menu No. 640) is set to [Off]. ◆ When the direct reply is set to [On], the interrupt screen of DV and DR mode is displayed in priority than APRS mode. CALL HISTORY You can call easily by setting the received party to the destination from a Call History even if you do not use a direct reply function. Up to 20 TX History and 100 RX History can be stored as a Call History in DV and DR mode. The Call History is not cleared when the power is switched [Off]. 1 Press [MODE] to enter DR mode. 2 Press [ENT] (1s). The Call History screen appears. 3 Select a list and press [ENT]. The transmission setting is changed and returns to the frequency screen. Note: ◆ Pressing [ENT] (1s) does not work in DV mode. Press [F], [MODE], select [Destination Select] in the Digital Function Menu, and select Call History. 38