Kenwood TH-D74A User Manual 1 - Page 14
Basic Operations
![]() |
View all Kenwood TH-D74A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
BASIC OPERATIONS SWITCHING THE POWER ON/ OFF Switching the Power ON Press [ ] (1s). The power on message momentarily appears, and frequency screen appears. 2 Change the balance with [ ]/[ ] or [ENC] control. • Band A and B are set to the same volume level (MAX) as a default setting. Pressing [MODE] returns to the previous screen without changing the setting. When you select [Operation Band Only], the sound of the operation band is outputted with priority. Switching the Power OFF Press [ ] (1s). ADJUSTING THE INTERNAL CLOCK When the built-in GPS function is turned ON, the year, month, day, and time are automatically set from the GPS satellite information. The default setting of the built-in GPS function is [On]. If the GPS information cannot be received, you can manually enter the date and time. 1 Access Menu No. 950. Date & Time screen appears by pressing [MENU], [PF1], [LIST], [MARK]. Setting examples When used in combination with APRS: When using band A for voice calls, use the transceiver with the sound of band B set to a low volume level or muted. When simultaneously scanning two waves: If [Operation Band Only] is set, a voice is output only for the operation band when the operation and non-operation band become busy at the same time. 3 Press [ENT] to set the volume balance. 4 Press [MENU] to return to the frequency screen. SELECTING DUAL BAND MODE/ SINGLE BAND MODE You can switch the transceiver between dual band operation and single band operation. 1 Press [F], [A/B]. • Each time you press [F], [A/B], the transceiver switches between Single band and Dual band mode. Dual Band mode Single Band mode 2 Set the date, time, and time zone with [ ]/[ ] or [ENC] control. 3 Press [A/B]. The date, time, and time zone are set. 4 Press [MENU] to return to the frequency screen. ADJUSTING THE VOLUME Rotate the [VOL] control to increase the volume and counterclockwise to decrease the volume. When no sound is heard (the squelch is closed), you can adjust the noise level by rotating the [VOL] control while pressing the [MONI]. SELECTING AN OPERATION BAND You can select a band A or B as an operation band for changing the frequency or setting various operations, etc. 1 Press [A/B] to select operating band A or B. Dual Band A Dual Band B VOLUME BALANCE (BAND A/B) This function adjusts the volume balance when using the transceiver with dual bands. 1 Access Menu No. 910. Volume balance screen appears by pressing [MENU], [PF1], [VFO], [MARK]. Single Band A Single Band B 12
![](/manual_guide/products/kenwood-thd74a-user-manual-7a922ab/14.png)