Kenwood TH-D74A User Manual 1 - Page 32

Basic Settings

Get Kenwood TH-D74A PDF manuals and user guides View all Kenwood TH-D74A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

APRS® APRS DATA COMMUNICATION • This function uses the APRS format for data communications including your station position, messages, etc. • When data is received from another station directly, via digipeaters and/or IGate stations, the direction of the received station (from your station's perspective), their distance, and their grid square locator is displayed. Any comments sent by the other stations are also displayed. • APRS (Automatic Packet Reporting System) is a worldwide system introduced by Bob Bruninga, WB4APR. < APRS® is a software program and registered trademark of Bob Bruninga, WB4APR.> Official APRS Website: http://www.aprs.org APRS Network Digipeater • Digipeater (Digital Repeater) relays digital packet data. When a Digipeater receives a packet, it saves it to memory. When the reception ends, the packet data is retransmitted on the same frequency. Using Digipeaters, it is possible to exchange APRS packets long distances. IGate • IGate (Internet Gateway) is a very useful and important feature for APRS as well as Digipeater. IGate stations bridge APRS packets between RF and the Internet. By going through the IGate stations, you can enjoy the communication with the further distant stations which are not covered only by Digipeaters. Digipeater stations and IGate stations are operated by the volunteer people in each region. Selecting your Station Icon 1 Access Menu No. 501. 2 Select an icon which will be displayed on the monitors of other stations as your ID. You may select an icon depending on your current location. It is important that the icon conveys the operational status of the station as well as the SSID. Icon Examples ICON Meaning Person Bicycle Motorcycle Car Bus Railroad Engine Home BASIC SETTINGS This part covers only the minimum necessary settings for basic operation as an APRS handheld portable station. Refer to the User Manual (detailed instruction manual) on the Website for more advanced settings. My Callsign Program your Callsign using a maximum of 9 alphanumeric characters including SSID (Secondary Station IDentifiers) such as -7, -9, or -14. Unless you program a Callsign, you cannot transmit APRS packets. 1 Access Menu No. 500. The display for entering a Callsign appears. You can enter 0 to 9, A to Z, and -. 2 Press [ENT] to set the Callsign. Note: ◆ For SSID characters, refer to the guideline on the Website (http:// aprs.org/aprs11/SSIDs.txt) by Bob Bruninga, WB4APR. ◆ When all settings are blank, "NOCALL" is automatically set. In this case, the Position packet (Beacon), Object Packet, or Message packet cannot be transmitted. Bicycle icon selected 3 Press [A/B] to set your station icon. Press [MENU] to return to the previous screen. Note: ◆ Set an icon that represents your operational status. (For example, setting an Aircraft icon or Balloon icon to a fixed station will cause confusion when a station receives a beacon.) Setting the Data Band Frequency Set the data band frequency to the APRS network frequency. The default setting of the data band is band A. You can change the data band to band B by Menu No. 506. Note: ◆ The APRS network frequency will depend on what region of the world you are operating as follows: North America: 144.390 MHz, Europe: 144.800 MHz Australia: 145.175 MHz, New Zealand: 144.575 MHz Argentina: 144.930 MHz, Brazil: 145.570 MHz Japan: 144.640 MHz (9600 bps)/ 144.660 MHz (1200 bps) 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
30
APRS
®
APRS DATA COMMUNICATION
•
This function uses the APRS format for data
communications including your station position, messages,
etc.
•
When data is received from another station directly, via
digipeaters and/or IGate stations, the direction of the
received station (from your station’s perspective), their
distance, and their grid square locator is displayed. Any
comments sent by the other stations are also displayed.
•
APRS (Automatic Packet Reporting System) is a
worldwide system introduced by Bob Bruninga, WB4APR.
< APRS® is a software program and registered trademark
of Bob Bruninga, WB4APR.>
Official APRS Website: http://www.aprs.org
APRS Network
Digipeater
•
Digipeater (Digital Repeater) relays digital packet data.
When a Digipeater receives a packet, it saves it to
memory. When the reception ends, the packet data is re-
transmitted on the same frequency. Using Digipeaters, it is
possible to exchange APRS packets long distances.
IGate
•
IGate (Internet Gateway) is a very useful and important
feature for APRS as well as Digipeater. IGate stations
bridge APRS packets between RF and the Internet.
By going through the IGate stations, you can enjoy the
communication with the further distant stations which are
not covered only by Digipeaters.
Digipeater stations and IGate stations are operated by the
volunteer people in each region.
BASIC SETTINGS
This part covers only the minimum necessary settings for
basic operation as an APRS handheld portable station. Refer
to the User Manual (detailed instruction manual) on the
Website for more advanced settings.
My Callsign
Program your Callsign using a maximum of 9 alphanumeric
characters including SSID (Secondary Station IDentifiers)
such as -7, -9, or -14. Unless you program a Callsign, you
cannot transmit APRS packets.
1
Access Menu No. 500.
The display for entering a Callsign appears.
You can enter 0 to 9, A to Z, and –.
2
Press
[ENT]
to set the Callsign.
Note:
◆
For SSID characters, refer to the guideline on the Website (http://
aprs.org/aprs11/SSIDs.txt) by Bob Bruninga, WB4APR.
◆
When all settings are blank, “NOCALL” is automatically set. In this
case, the Position packet (Beacon), Object Packet, or Message
packet cannot be transmitted.
Selecting your Station Icon
1
Access Menu No. 501.
2
Select an icon which will be displayed on the monitors
of other stations as your ID. You may select an icon
depending on your current location. It is important that the
icon conveys the operational status of the station as well
as the SSID.
Icon Examples
ICON
Meaning
Person
Bicycle
Motorcycle
Car
Bus
Railroad Engine
Home
Bicycle icon selected
3
Press
[A/B]
to set your station icon.
Press
[MENU]
to return to the previous screen.
Note:
◆
Set an icon that represents your operational status. (For example,
setting an Aircraft icon or Balloon icon to a fixed station will cause
confusion when a station receives a beacon.)
Setting the Data Band Frequency
Set the data band frequency to the APRS network frequency.
The default setting of the data band is band A.
You can change the data band to band B by Menu No. 506.
Note:
◆
The APRS network frequency will depend on what region of the
world you are operating as follows:
North America: 144.390 MHz, Europe: 144.800 MHz
Australia: 145.175 MHz, New Zealand: 144.575 MHz
Argentina: 144.930 MHz, Brazil: 145.570 MHz
Japan: 144.640 MHz (9600 bps)/ 144.660 MHz (1200 bps)