Kenwood TH-D74A User Manual 1 - Page 42
Bluetooth
![]() |
View all Kenwood TH-D74A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Bluetooth® TURNING ON/ OFF THE Bluetooth FUNCTION You can turn On/ Off the Bluetooth function. 1 Access Menu No. 930. When the Bluetooth function is turned on, < on the display. > appears 6 Press [A/B]. [Connecting. . .] screen appears. 7 Make the connection operation by the headset. When the headset is connected, < > appears on the display. • Since the connection operation depends on the headset, refer to the instruction manual of the headset. [On]: Turns on the Bluetooth function. [Off]: Turns off the Bluetooth function. Connecting with a Headset (Pairing) When connecting the transceiver with a Bluetooth compatible device, you need to first pair the devices. Pairing is a function for registering devices for a Bluetooth connection as a connection pair. The following explains how to connect via Bluetooth using the example of a commercially available headset. Note: ◆ For the device to be connected with the transceiver via Bluetooth, be sure to purchase a headset or other device that is compatible with Bluetooth. Also refer to the instruction manual of the device. ◆ A connection may not be possible depending on the specifications or settings of the device. There is no guarantee that the transceiver will be able to communicate wirelessly with all Bluetooth devices. 1 Access Menu No. 930 to turn on the Bluetooth function. 2 Place the headset (device to be connected) near the transceiver. • Place it within approximately 1 meter each other. 3 Set the headset (device to be connected) to the pairing mode (Bluetooth connection standby state). • For how to enable the pairing mode, refer to the instruction manual of the headset (device to be connected). 4 Access Menu No. 932. A device search begins and the recognized device is added to the Bluetooth device search list. 5 Select the device to be connected When connecting the device that is already selected, move to step 6. • If you select the device and press [ ], the Bluetooth device information screen appears. You can confirm the device name, device address, and device class. Note: ◆ The volume of the headset can not be adjusted by the [VOL] control of the transceiver. Adjust the volume by the headset volume. Entering the PIN Code When searching for the device, you may be requested to enter the PIN code depending on the device to be connected. When Requested to Enter the PIN Code The PIN code input screen appears. Refer to the instruction manual of the device to be connected and enter the PIN code using the number keys and press [A/B]. If you press [ ] when the PIN code input screen is displayed, the Bluetooth device information screen appears. You can confirm the device name, device address, and device class. Note: ◆ The PIN code differs depending on the device to be connected. Refer to the instruction manual of the Bluetooth device and enter the correct PIN code. Disconnecting from a Bluetooth device You can disconnect a connected Bluetooth device to stop communication. 1 Access Menu No. 933. 2 Select the device. • When disconnecting the device that is already selected, move to step 3. If you press [ ], the Bluetooth device information screen appears. If you select the device to be disconnected and press [ ], the Bluetooth device information screen appears. You can confirm the device name, device address, and device class. Pressing [MODE] returns to the previous screen. 3 Press [A/B]. The disconnection process begins. • If 30 seconds or more passes during the disconnection process, the Bluetooth device disconnection failure screen appears. Pressing [A/B] returns to the frequency screen. Perform the procedure again from step 1. 40
![](/manual_guide/products/kenwood-thd74a-user-manual-7a922ab/42.png)