Kyocera KM-2030 2030 Instruction Handbook Rev 2C - Page 13
Copy quality selection key/Auto Exposure/Text & Photo
View all Kyocera KM-2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
CHAPTER 2 NAMES OF PARTS q Initial mode (at the end of warm-up or when the Reset key is pressed) In the initial mode, paper of the same size as the original is selected automatically ("auto paper selection mode"), the number of copies is set to "1" and copy quality is set to "Text & Photo". NOTE • It is also possible to change the default setting for copy exposure adjustment to "auto exposure mode" in the initial mode. (See "1 Exposure mode" on page 6-11.) › Margin/Border Erase/Book Erase key (Indicator) (Press to create margins or erase borders in copies. The indicator will light green. See pages 5-5 and 6.) fi Copy quality selection key/Auto Exposure/Text & Photo/ Photo/Text indicators (Press to select copy quality. See page 4-2.) fl Sort mode key/Staple Sort/Sort/Group indicators (Press to sort copes into separate sets, or for stapling, sorting or grouping copies with the optional finisher. The indicators will light green in the respective modes.) ‡ Auto selection key (Indicator) (Press to perform auto selection copying. The indicator will light green. The optional DF must be installed to use this function. See page 5-10.) q Auto clear function About 90 seconds after copying stops, the copier will automatically return to the same settings as those after warm up. (However, the exposure mode will not change.) Copying can be performed at the same settings (copy mode, number of copies and exposure mode) if copying is started before the auto clear function operates. q Automatic drawer switching function If two or more drawers contain paper of the same size in the same orientation and the paper in one drawer runs out during copying, this function switches paper feed from the empty drawer to a full drawer. NOTE • The automatic drawer switching function can be disabled. (See "$ Auto drawer switch" on page 6-19.) Message display 1 Displays messages regarding the machine status and required operations. 2 Displays copy modes. APS (auto paper selection mode) AMS (auto magnification selection mode) 1:1 (manual copy mode) 3 Displays magnification ratio. 4 Displays the original size, paper size and the currently selected drawer. 5 Displays the number of copies to be made. 2-4