Kyocera KM-2030 2030 Instruction Handbook Rev 2C - Page 47
How to set the copy default setting mode, Exposure mode, Exposure steps
View all Kyocera KM-2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
CHAPTER 6 COPIER MANAGEMENT (2) How to set the copy default setting mode 1 Press the */Language key to light the indicator. The management mode selection screen will appear. 2 Press the cursor down key to select "Copy default". 6 Press the enter key. 7 Make settings as explained below. NOTE • (>) displayed in each setting screen indicates the present setting value. • After finishing each setting, the display will return to the screen in step 5. If changing other settings, repeat step 5 to 7. 8 Press the cursor up key to select "End" and press the enter key to finish settings. The message display will return to the "Ready to copy." screen. 1 Exposure mode 1 Press the cursor down or up key to select "Auto mode", "Mixed mode", "Photo mode" or "Text mode". 3 Press the enter key. 4 Enter the management code "2000" with the numeric keys. 2 Press the enter key. 2 Exposure steps 1 Press the cursor down or up key to select "5 steps" or "9 steps". NOTE • The 4-digit management code can be changed. (See "@ Manage- ment code change" on page 6-18.) 5 Press the cursor down or up key to select the copy default setting to be changed. See "(1) Copy default settings" on page 6-9 for settings that can be changed. 2 Press the enter key. 6-11