Kyocera KM-2030 2030 Instruction Handbook Rev 2C - Page 15
Loading paper into the multi-bypass, IMPORTANT
View all Kyocera KM-2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
IMPORTANT When loading 11" x 17" paper, push down the length adjustment plate completely as shown in the illustration. CHAPTER 3 HOW TO LOAD PAPER 6 Set the supplied paper size sheet so that the size of the paper loaded can be checked by looking at the front of the drawer. 5 Set the paper flush against the left-hand wall of the drawer. 7 Gently push the drawer back in. * If you force the drawer in, paper may come out from under the claws and paper misfeed may result. NOTE • Before leaving the copier in disuse for a prolonged period of time, remove the paper from the drawer(s) and seal it in its original packaging to protect from moisture. Also, when storing paper in a temperature and high humidity enbironment, seal it in a moistureproof bag. IMPORTANT • There is a sticker (1 in the illustration) indicating paper capacity attached to the inside of the drawer. Do not load paper above this limit. • When loading paper into the drawer, make sure that the copy side is facing upward. (The copy side is the side facing upward when the package is opened.) • Check that the length adjustment plate makes secure contact with the paper. If there is a gap, adjust the position of the length adjustment plate. • If small-sized paper jams frequently under high temperature and high humidity conditions, reduce the number of sheets to the level of the black line indicated on the sticker (1 in the illustration). (3) Loading paper into the multi-bypass Special paper as well as standard paper can be loaded into the multibypass. When copying onto transparencies or thick paper, be sure to use the multi-bypass. NOTE • Number of sheets of standard paper, colored paper and letterheads that can be loaded into the multi-bypass differ depending on the paper size. 11" x 17" and 8 1/2" x 14" (A3, B4 and Folio): 25 sheet 11" x 8 1/2" and 5 1/2" x 8 1/2" (A4 to A6R): 50 sheets • The types of special paper and the number of sheets that can be loaded in the multi-bypass are: · Transparencies: 1 sheet · Standard paper (120g/m2, 160g/m2): 1 sheet IMPORTANT • When setting special paper, such as transparencies and thick paper, into the multi-bypass, select the type of paper by referring to "q Setting the paper type and size for the multi-bypass" on page 3-3. 3-2